Publikationen

Teilprojekt A01 (Hasse, Langenbach, Müller)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

H. Hasse, M. Horsch, M. Kopnarski, K. Langenbach, R. Müller, S. Stephan, H. M. Urbassek: Adsorption and Wetting of Component Surfaces, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 203-229, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_9

S. Stephan, S. Schmitt, H. Hasse, H. M. Urbassek: Molecular dynamics simulation of the Stribeck curve: Boundary lubrication, mixed lubrication, and hydrodynamic lubrication on the atomistic level, Friction (2023).

D. Fertig, S. Stephan: Influence of dispersive long-range interactions on transport and excess properties of simple mixtures, Molecular Physics (2023) e2162993.

J. Wolf, Y. Flieger, F. Diewald, K. Langenbach, S. Stephan, H. Hasse, R. Müller: Wetting of rough surfaces in a phase field model, Proc. Appl. Math. Mech. 22 (2023) e202200275.

S. Schmitt, T. Vo, M. P. Lautenschlaeger, S. Stephan, H. Hasse: Molecular dynamics simulation study of heat transfer across solid–fluid interfaces in a simple model system, Molecular Physics 120 (2022) e2057364.

D. Fertig, H. Hasse, S. Stephan: Transport properties of binary Lennard-Jones mixtures: Insights from entropy scaling and conformal solution theory, Journal of Molecular Liquids 367 (2022) 120401.

J. Wolf, F. Diewald, M. Heier, J. Staubach, K. Langenbach, H. Hasse, R. Müller: Adsorption in a phase field model for wetting, Proc. Appl. Math. Mech. 21 (2021) e202100145.

F. Diewald, J. Wolf, M. Heier, M. Lautenschläger, S. Stephan, C. Kuhn, K. Langenbach, H. Hasse, R. Müller: Phase Field Modeling of Dynamic Surface Wetting informed by Molecular Simulations, Proc. Appl. Math. Mech. 21 (2021) e202100051.

M. Heier, F. Diewald, R. Müller, K. Langenbach, H. Hasse: Adsorption of Binary Mixtures of the Lennard-Jones Truncated and Shifted Fluid on Planar Walls, Journal of Chemical & Engineering Data 66 (2021) 3722-3734.

S. Stephan, M. Dyga, I. Alabd Alhafez, J. Lenhard, H. M. Urbassek, H. Hasse: Reproducibility of atomistic friction computer experiments: a molecular dynamics simulation study, Molecular Simulation 47 (2021) 1509-1521.

M. Heier, S. Stephan, F. Diewald, R. Müller, K. Langenbach, H. Hasse: Molecular Dynamics Study of Wetting and Adsorption of Binary Mixtures of the Lennard-Jones Truncated and Shifted Fluid on a Planar Wall, Langmuir (2021) 7405–7419.

M. Graf, M. Kuntz, H. Autenrieth, F. Diewald, R. Müller: Phase field modeling and simulation of the evolution of twelve crystallographic martensite variants in austenitic parent grains, Proc. Appl. Math. Mech. 20 (2021) e202000121.

F. Diewald, M. Heier, M. Lautenschläger, C. Kuhn, K. Langenbach, H. Hasse, R. Müller: Phase Field Simulations of Wetting Based on Molecular Simulations, Proc. Appl. Math. Mech. 20 (2021) e202000035.

M. Heier, R. Merz, S. Becker, K. Langenbach, M. Kopnarski, H. Hasse: Experimental Study of the Influence of the Adsorbate Layer Composition on the Wetting of Different Substrates with Water, Adsorpt. Sci. Technol. 2021 (2021) 6663989.

S. Basten, B. Kirsch, R. Merz, M. Kopnarski, H. Hasse, C. J. Aurich: Adsorption and reaction layers when turning AISI 304 using various cooling strategies, Procedia CIRP 87 (2020) 125-130.

F. Diewald, M. P. Lautenschlaeger, S. Stephan, K. Langenbach, C. Kuhn, S. Seckler, H.-J. Bungartz, H. Hasse, R. Müller: Molecular dynamics and phase field simulations of droplets on surfaces with wettability gradient, Computer Methods in Applied Mechanics and Engineering 361 (2020) 112773.

F. Diewald, M. Heier, M. Lautenschläger, M. Horsch, C. Kuhn, K. Langenbach, H. Hasse, R. Müller: A Navier-Stokes-Korteweg Model for Dynamic Wetting based on the PeTS Equation of State, Proc. Appl. Math. Mech. 19 (2019) e201900091.

J. Liu, M. Heier, W. G. Chapman, K. Langenbach: Adsorption in Purely Dispersive Systems from Molecular Simulation, Density Gradient Theory, and Density Functional Theory, Journal of Chemical & Engineering Data 65 (2019) 1222-1233.

S. Stephan, M. Dyga, H. M. Urbassek, H. Hasse: The Influence of Lubrication and the Solid–Fluid Interaction on Thermodynamic Properties in a Nanoscopic Scratching Process, Langmuir 35 (2019) 16948-16960.

M. Heier, F. Diewald, M. Horsch, K. Langenbach, R. Müller, H. Hasse: Molecular Dynamics Study of Adsorption of the Lennard-Jones Truncated and Shifted Fluid on Planar Walls, J. Chem. Eng. Data 64 (2019) 386-394.

S. Stephan, M. P. Lautenschlaeger, I. A. Alhafez, M. T. Horsch, H. M. Urbassek, H. Hasse: Molecular Dynamics Simulation Study of Mechanical Effects of Lubrication on a Nanoscale Contact Process, Tribol. Lett. 66 (2018) 126.

M. Heier, S. Stephan, J. Liu, W. G. Chapman, H. Hasse, K. Langenbach: Equation of state for the Lennard-Jones truncated and shifted fluid with a cut-off radius of 2.5 σ based on perturbation theory and its applications to interfacial thermodynamics, Mol. Phys. 116 (2018) 2083-2094.

F. Diewald, M. Heier, M. Horsch, C. Kuhn, K. Langenbach, H. Hasse, R. Müller: Three-dimensional phase field modeling of inhomogeneous gas-liquid systems using the PeTS equation of state, J. Chem. Phys. 149 (2018) 064701.

M. Heier, S. Becker, H. M. Urbassek, M. Horsch, H. Hasse: Correction to “Contact Angle of Sessile Drops in Lennard-Jones Systems”, Langmuir 34 (2018) 3374-3374.

F. Diewald, C. Kuhn, M. Heier, K. Langenbach, M. Horsch, H. Hasse, R. Müller: Investigating the stability of the phase field solution of equilibrium droplet configurations by eigenvalues and eigenvectors, Comput. Mater. Sci. 141 (2018) 185-192.

F. Diewald, C. Kuhn, M. Heier, M. Horsch, K. Langenbach, H. Hasse, R. Müller: Surface Wetting with Droplets: A Phase Field Approach, Proc. Appl. Math. Mech. 17 (2017) 501-502.

A. Schlüter, C. Kuhn, T. Noll, F. Diewald, R. Müller: Numerical Solution Strategies for a Dynamic Phase Field Fracture Model, Appl. Mech. Mater. 869 (2017) 29-49.

S. Werth, K. Stöbener, M. Horsch, H. Hasse: Simultaneous description of bulk and interfacial properties of fluids by the Mie potential, Mol. Phys. 115 (2017) 1017-1030.

S. Becker, M. Kohns, H. M. Urbassek, M. Horsch, H. Hasse: Static and Dynamic Wetting Behavior of Drops on Impregnated Structured Walls by Molecular Dynamics Simulation, J. Phys. Chem. C 121 (2017) 12669-12683.

S. Werth, M. Horsch, H. Hasse: Molecular simulation of the surface tension of 33 multi-site models for real fluids, J. Mol. Liq. 235 (2017) 126-134.

S. Werth, M. Kohns, K. Langenbach, M. Heilig, M. Horsch, H. Hasse: Interfacial and bulk properties of vapor-liquid equilibria in the system toluene + hydrogen chloride + carbon dioxide by molecular simulation and density gradient theory + PC-SAFT, Fluid Phase Equilib. 427 (2016) 219-230.

S. Becker, S. Werth, M. Horsch, K. Langenbach, H. Hasse: Interfacial tension and adsorption in the binary system ethanol and carbon dioxide: Experiments, molecular simulation and density gradient theory, Fluid Phase Equilib. 427 (2016) 476-487.

F. Diewald, C. Kuhn, R. Blauwhoff, M. Heier, S. Becker, S. Werth, M. Horsch, H. Hasse, R. Müller: Simulation of Surface Wetting by Droplets Using a Phase Field Model, Proc. Appl. Math. Mech. 16 (2016) 519-520.

S. Becker, R. Merz, H. Hasse, M. Kopnarski: Solvent cleaning and wettability of technical steel and titanium surfaces, Adsorpt. Sci. Technol. 34 (2016) 261-274.

J. C. Aurich, F. Schneider, P. Mayer, B. Kirsch, H. Hasse: Oberflächenerzeugungs-Morphologie-Eigenschafts-Beziehungen: Vom Fertigungsverfahren direkt zu den Bauteileigenschaften, ZWF 111 (2016) 213-216.

S. Werth, M. Horsch, H. Hasse: Surface tension of the two center Lennard-Jones plus point dipole fluid, J. Chem. Phys. 144 (2016) 054702.

S. Werth, M. Horsch, H. Hasse: Long-range correction for dipolar fluids at planar interfaces, Mol. Phys. 113 (2015) 3750-3756.

M. Horsch, H. Hasse: Molecular Modeling and Simulation in Fluid Process Engineering, Chem. Bio. Eng. Reviews 2 (2015) 303-310.

S. Werth, K. Stöbener, P. Klein, K.-H. Küfer, M. Horsch, H. Hasse: Molecular modelling and simulation of the surface ten¬sion of real quadrupolar fluids, Chem. Eng. Sci. 121 (2015) 110-117.

S. Werth, M. Horsch, H. Hasse: Surface tension of the two center Lennard-Jones plus quadrupole model fluid, Fluid Phase Equilib. 392 (2015) 12-18.

S. Becker, H. M. Urbassek, M. Horsch, H. Hasse: Contact angle of sessile drops in Lennard-Jones model systems, Langmuir 30 (2014) 13606-13614.

M. Horsch, H. Hasse: Molekulare Modellierung und Simulation in der Fluidverfahrenstechnik, Chem. Ing. Tech. 86 (2014) 982-990.

M. Horsch, H. Hasse: Molecular simulation of nano-dispersed fluid phases, Chem. Eng. Sci. 107 (2014) 235-244.

C. Niethammer, S. Becker, M. Bernreuther, M. Buchholz, W. Eckhardt, A. Heinecke, S. Werth, H.-J. Bungartz, C. W. Glass, H. Hasse, J. Vrabec, M. Horsch: ls1 mardyn - the massively parallel molecular dynamics codefor large systems, J. Chem. Theory Comput. 10 (2014) 4455-4464.

K. Stöbener, P. Klein, S. Reiser, M. Horsch, K.-H. Küfer, H. Hasse: Multicriteria optimization of molecular force fields by Pareto approach, Fluid Phase Equilib. 373 (2014) 100-108.

S. Werth, G. Rutkai, J. Vrabec, M. Horsch, H. Hasse: Long-range correction for multi-site Lennard-Jones models and planar interfaces, Mol. Phys. 112 (2014) 2227-2234.

M. Horsch, S. Becker, J. M. Castillo, S. Deublein, A. Fröscher, S. Reiser, S. Werth, J. Vrabec, H. Hasse: Molecular modelling and simulation of electrolyte solutions, biomolecules, and wetting of component surfaces, in Nagel et al. (eds.): High Performance Computing in Science and Engineering '13, Transactions of the High Performance Computing Center, Stuttgart (HLRS), pp. 647-661. Springer, Heidelberg (2013).

M. Horsch, C. Niethammer, J. Vrabec, H. Hasse: Computational molecular engineering as an emerging technology in process engineering, Informat. Technol. 55 (2013) 97-101.

S. Werth, S. V. Lishchuk, M. Horsch, H. Hasse: The influence of the liquid slab thickness on the planar vapor-liquid interfacial tension, Physica A 392 (2013) 2359-2367.

M. Horsch, H. Hasse, A. K. Shchekin, A. Agarwal, S. Eckelsbach, J. Vrabec, E. A. Müller, G. Jackson: Excess equimolar radius of liquid drops, Phys. Rev. E 85 (2012) 031605.

b) Andere Veröffentlichungen

C. Burkhart, M. Heier, R. Merz, J. Lösch, C. Wagner, S. Thielen, B. Sauer, M. Kopnarski, H. Hasse: Einfluss des Schmierstoffs auf Verschleißverhalten und -Mechanismen im System Radialwellendichtring, 62. Tribologie-Fachtagung (GfT), Online-Konferenz (2021).

H. Hasse, S. Antonyuk, R. Ulber: Bauteiloberflächen – Morphologie auf der Mikroskala, Chem. Ing. Tech. 88 (2016) 1298-1298.

I. G. Reichenbach, S. Becker, H. Hasse, J. C. Aurich: Machining hydrophobic structures with ultra-small micro end mills, Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology, Bedford, England (2014).

c) Erteilte und angemeldete Patente (Entfällt)

 

Teilprojekt A02 (Urbassek)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

H. M. Urbassek, I. Alabd Alhafez, H. Hasse, M. Kopnarski, S. Stephan: Indentation and Scratching on the Nanoscale, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 41-65, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_3

H. Hasse, M. Horsch, M. Kopnarski, K. Langenbach, R. Müller, S. Stephan, H. M. Urbassek: Adsorption and Wetting of Component Surfaces, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 203-229, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_9

T. Beck, M. Smaga, S. Antonyuk, D. Eifler, R. Müller, H. M. Urbassek, T. Zhu: Influence of Manufacturing and Load Conditions on the Phase Transformation and Fatigue of Austenitic Stainless Steels, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 257-288, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_11

S. Stephan, S. Schmitt, H. Hasse, H. M. Urbassek: Molecular dynamics simulation of the Stribeck curve: Boundary lubrication, mixed lubrication, and hydrodynamic lubrication on the atomistic level, Friction (2023).

I. Alabd Alhafez, O. R. Deluigi, D. Tramontina, C. J. Ruestes, E. M. Bringa, H. M. Urbassek: Simulated nanoindentation into single-phase fcc FexNi1−x alloys predicts maximum hardness for equiatomic stoichiometry, Sci Rep 13 (2023) 9806.

I. Alabd Alhafez, M. Kopnarski, H. M. Urbassek: Scratching a soft layer above a hard substrate, Philosophical Magazine (2023) 1-12.

I. Alabd Alhafez, M. Kopnarski, H. M. Urbassek: Multiple Scratching: An Atomistic Study, Tribol. Lett. 71 (2023).

I. Alabd Alhafez, H. M. Urbassek: Indentation and Scratching with a Rotating Adhesive Tool: A Molecular Dynamics Simulation Study, Tribol. Lett. 70 (2022).

D. Thürmer, S. Zhao, O. R. Deluigi, C. Stan, I. A. Alhafez, H. M. Urbassek, M. A. Meyers, E. M. Bringa, N. Gunkelmann: Exceptionally high spallation strength for a high-entropy alloy demonstrated by experiments and simulations, J. Alloys Compd. 895 (2021).

S. Stephan, M. Dyga, I. Alabd Alhafez, J. Lenhard, H. M. Urbassek, H. Hasse: Reproducibility of atomistic friction computer experiments: a molecular dynamics simulation study, Molecular Simulation 47 (2021) 1509-1521.

K. E. Avila, V. H. Vardanyan, H. M. Urbassek: Transition to chip serration in simulated cutting of metallic glasses, Eur. Phys. J. B 94 (2021).

I. Alhafez, C. J. Ruestes, E. M. Bringa, H. M. Urbassek: Indentation and scratching of iron by a rotating tool – a molecular dynamics study, Comput. Mater. Sci. 194 (2021) 110445.

I. Alhafez, C. J. Ruestes, S. Zhao, A. M. Minor, H. M. Urbassek: Dislocation structures below a nano-indent of the CoCrNi medium-entropy alloy, Mater. Lett. 283 (2021) 128821.

K. E. Avila, V. H. Vardanyan, I. Alabd Alhafez, M. Zimmermann, B. Kirsch, H. M. Urbassek: Applicability of cutting theory to nanocutting of metallic glasses: Atomistic simulation, J. Non-Cryst. Solids 550 (2020) 120363.

I. A. Alhafez, H. M. Urbassek: Influence of the Rake Angle on Nanocutting of Fe Single Crystals: A Molecular-Dynamics Study, Crystals 10 (2020).

M. C. Zonana, C. J. Ruestes, E. M. Bringa, H. M. Urbassek: Effect of Tip Roundness on the Nanoindentation of Fe Crystals, Tribol. Lett. 68 (2020) 1-11.

J. A. Hofer, C. J. Ruestes, E. M. Bringa, H. M. Urbassek: Effect of subsurface voids on the nanoindentation of Fe crystals, Modell. Simul. Mater. Sci. Eng. 28 (2020) 025010.

S. Stephan, M. Dyga, H. M. Urbassek, H. Hasse: The Influence of Lubrication and the Solid–Fluid Interaction on Thermodynamic Properties in a Nanoscopic Scratching Process, Langmuir 35 (2019) 16948-16960.

I. A. Alhafez, C. J. Ruestes, E. M. Bringa, H. M. Urbassek: Influence of pre-existing plasticity on nanoindentation – an atomistic analysis of the dislocation fields produced, J. Mech. Phys. Solids 132 (2019) 103674.

I. A. Alhafez, C. J. Ruestes, E. M. Bringa, H. M. Urbassek: Nanoindentation into a high-entropy alloy – An atomistic study, J. Alloys Compd. 803 (2019) 618-624.

I. A. Alhafez, H. M. Urbassek: Influence of tip adhesion on nanoindentation and scratching, Modell. Simul. Mater. Sci. Eng. 27 (2019) 065014.

J. Meiser, I. A. Alhafez, T. Beck, M. Smaga, R. Müller, H. M. Urbassek: Nanoindentation into a metastable austenite triggers the martensitic phase transformation—An atomistic study, AIP Adv. 9 (2019) 015228.

S. Deldar, I. A. Alhafez, M. Smaga, T. Beck, H. M. Urbassek: Cyclic Indentation of Iron: A Comparison of Experimental and Atomistic Simulations, Metals 9 (2019) 541.

S. Stephan, M. P. Lautenschlaeger, I. A. Alhafez, M. T. Horsch, H. M. Urbassek, H. Hasse: Molecular Dynamics Simulation Study of Mechanical Effects of Lubrication on a Nanoscale Contact Process, Tribol. Lett. 66 (2018) 126.

Z. Zhang, I. A. Alhafez, H. M. Urbassek: Scratching an Al/Si Interface: Molecular Dynamics Study of a Composite Material, Tribol. Lett. 66 (2018) 86.

C. J. Ruestes, C. Anders, E. M. Bringa, H. M. Urbassek: Nanoindentation tests of heavy-ion-irradiated Au foams—molecular dynamics simulation, J. Appl. Phys. 123 (2018) 225903.

M. Heier, S. Becker, H. M. Urbassek, M. Horsch, H. Hasse: Correction to “Contact Angle of Sessile Drops in Lennard-Jones Systems”, Langmuir 34 (2018) 3374-3374.

I. A. Alhafez, H. M. Urbassek: Orientation dependence in nanocutting of Fe single crystals: A molecular-dynamics study, Comput. Mater. Sci. 143 (2018) 286-294.

P. Umstätter, H. M. Urbassek: Influence of Elastic Stiffness and Surface Adhesion on Bouncing of Nanoparticles, Nanoscale Res. Lett. 12 (2017) 637.

I. A. Alhafez, C. J. Ruestes, H. M. Urbassek: Size of the Plastic Zone Produced by Nanoscratching, Tribol. Lett. 66 (2017) 20.

M. L. Nietiadi, P. Umstätter, I. A. Alhafez, Y. Rosandi, E. M. Bringa, H. M. Urbassek: Collision-Induced Melting in Collisions of Water Ice Nanograins: Strong Deformations and Prevention of Bouncing, Geophys. Res. Lett. 44 (2017) 10,822-10,828.

C. J. Ruestes, I. A. Alhafez, H. M. Urbassek: Atomistic Studies of Nanoindentation—A Review of Recent Advances, Crystals 7 (2017) 293.

C. J. Ruestes, E. M. Bringa, Y. Gao, H. M. Urbassek: Molecular Dynamics Modeling of Nanoindentation, in: A. Tiwari and S. Natarajan (eds.): Applied Nanoindentation in Advanced Materials, pp. 313-345, Wiley Online Library (2017). ISBN/ISSN: 9781119084501.

N. Gunkelmann, I. A. Alhafez, D. Steinberger, H. M. Urbassek, S. Sandfeld: Nanoscratching of iron: A novel approach to characterize dislocation microstructures, Comput. Mater. Sci. 135 (2017) 181-188.

S. Becker, M. Kohns, H. M. Urbassek, M. Horsch, H. Hasse: Static and Dynamic Wetting Behavior of Drops on Impregnated Structured Walls by Molecular Dynamics Simulation, J. Phys. Chem. C 121 (2017) 12669-12683.

M. L. Nietiadi, P. Umstätter, T. Tjong, Y. Rosandi, E. N. Millán, E. M. Bringa, H. M. Urbassek: The bouncing threshold in silica nanograin collisions, Phys. Chem. Chem. Phys. 19 (2017) 16555-16562.

I. A. Alhafez, Y. Gao, H. M. Urbassek: Nanocutting: A Comparative Molecular-Dynamics Study of Fcc, Bcc, and Hcp Metals, Curr. Nanosci. 13 (2017) 40-47.

I. A. Alhafez, A. Brodyanski, M. Kopnarski, H. M. Urbassek: Influence of Tip Geometry on Nanoscratching, Tribol. Lett. 65 (2017) 26.

Y. Gao, H. M. Urbassek: Scratching of nanocrystalline metals: A molecular dynamics study of Fe, Appl. Surf. Sci. 389 (2016) 688-695.

E. N. Millán, D. R. Tramontina, H. M. Urbassek, E. M. Bringa: Nucleation of plasticity in nanoparticle collisions, Phys. Rev. E 93 (2016) 063004.

N. Gunkelmann, Y. Rosandi, C. J. Ruestes, E. M. Bringa, H. M. Urbassek: Compaction and plasticity in nanofoams induced by shock waves: A molecular dynamics study, Comput. Mater. Sci. 119 (2016) 27-32.

J. Janßen, N. Gunkelmann, H. M. Urbassek: Influence of C concentration on elastic moduli of α′-Fe1-xCx alloys, Philos. Mag. 96 (2016) 1448-1462.

I. A. Alhafez, H. M. Urbassek: Scratching of hcp metals: A molecular-dynamics study, Comput. Mater. Sci. 113 (2016) 187-197.

I. A. Alhafez, C. J. Ruestes, Y. Gao, H. M. Urbassek: Nanoindentation of hcp metals: a comparative simulation study of the evolution of dislocation networks, Nanotechnology 27 (2016) 045706.

E. N. Millán, D. R. Tramontina, H. M. Urbassek, E. M. Bringa: The elastic-plastic transition in nanoparticle collisions, Phys. Chem. Chem. Phys. 18 (2016) 3423.

Y. Gao, A. Brodyanski, M. Kopnarski, H. M. Urbassek: Nanoscratching of iron: A molecular dynamics study of the influence of surface orientation and scratching direction, Comput. Mater. Sci. 103 (2015) 77-89.

Y. Gao, C. J. Ruestes, D. R. Tramontina, H. M. Urbassek: Comparative simulation study of the structure of the plastic zone produced by nanoindentation, J. Mech. Phys. Solids 75 (2015) 58-75.

N. Gunkelmann, D. R. Tramontina, E. M. Bringa, H. M. Urbassek: Morphological changes in polycrystalline Fe after compression and release, J. Appl. Phys. 117 (2015) 085901.

Y. Gao, C. J. Ruestes, H. M. Urbassek: Nanoindentation and nanoscratching of iron: Atomistic simulation of dislocation generation and reactions, Comp. Mater. Sci. 90 (2014) 232-240.

Y. Gao, H. M. Urbassek: Evolution of plasticity in nanometric cutting of Fe single crystals, Appl. Surface Sci. 317 (2014) 6-10.

Y. Gao, C. J. Ruestes, D. R. Tramontina, H. M. Urbassek: Comparative simulation study of the structure of the plastic zone produced by nanoindentation, J. Mech. Phys. Solids 75 (2015) 58–75.

N. Gunkelmann, E. M. Bringa, D. R. Tramontina, C. J. Ruestes, M. J. Suggit, A. Higginbotham, J. S. Wark, H. M. Urbassek: Shock waves in polycrystalline iron: Plasticity and phase transitions, Phys. Rev. B 89 (2014) 140102(R).

N. Gunkelmann, D. R. Tramontina, E. M. Bringa, H. M. Urbassek: Interplay of plasticity and phase transformation in shock wave propagation in nanocrystalline iron, New J. Phys. 16 (2014) 093032.

C. J. Ruestes, A. Stukowski, Y. Tang, D. R. Tramontina, P. Erhart, B. A. Remington, H. M. Urbassek, M. A. Meyers, E. M. Bringa: Atomistic Simulation of Tantalum Nanoindentation: Effects of indenter diameter, penetration velocity, and interatomic potentials on defect mechanisms and evolution, Mater. Sci. Eng. A 613 (2014) 390-403.

B. Wang, Y. Gao, H. M. Urbassek: Microstructure and magnetic disorder induced by nanoindentation in single-crystalline Fe, Phys. Rev. B 89 (2014) 104105.

N. Gunkelmann, E. M. Bringa, K. Kang, G. J. Ackland, C. J. Ruestes, H. M. Urbassek: Polycrystalline iron under compression: Plasticity and phase transitions, Phys. Rev. B 86 (2012) 144111.

N. Gunkelmann, H. Ledbetter, H. M. Urbassek: Experimental and atomistic study of the elastic properties of α’ Fe-C martensite, Acta Mat. 60 (2012) 4901-4907.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt A03 (Urbassek)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

T. Beck, M. Smaga, S. Antonyuk, D. Eifler, R. Müller, H. M. Urbassek, T. Zhu: Influence of Manufacturing and Load Conditions on the Phase Transformation and Fatigue of Austenitic Stainless Steels, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 257-288, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_11

J. Meiser, H. M. Urbassek: α ↔ γ phase transformation in iron: comparative study of the influence of the interatomic interaction potential, Modell. Simul. Mater. Sci. Eng. 28 (2020) 055011.

J. Meiser, H. M. Urbassek: Effect of Alloying Elements on the α-γ Phase Transformation in Iron, Materials 12 (2019) 1355.

J. Meiser, I. A. Alhafez, T. Beck, M. Smaga, R. Müller, H. M. Urbassek: Nanoindentation into a metastable austenite triggers the martensitic phase transformation—An atomistic study, AIP Adv. 9 (2019) 015228.

J. Meiser, H. M. Urbassek: Dislocations Help Initiate the α–γ Phase Transformation in Iron—An Atomistic Study, Metals 9 (2019) 90.

J. Meiser, H. M. Urbassek: Influence of the Crystal Surface on the Austenitic and Martensitic Phase Transition in Pure Iron, Crystals 8 (2018) 469.

J. Meiser, H. M. Urbassek: Ferrite-to-Austenite and Austenite-to-Martensite Phase Transformations in the Vicinity of a Cementite Particle: A Molecular Dynamics Approach, Metals 8 (2018) 837.

A. Mutter, B. Wang, J. Meiser, P. Umstätter, H. M. Urbassek: Magnetic structure of [0 0 1] tilt grain boundaries in bcc Fe studied via magnetic potentials, Philos. Mag. 97 (2017) 3027-3041.

S. Schmidt, C. Plate, R. Müller, R. Müller, J. Meiser, H. M. Urbassek: A phase field model for martensitic transformations with a temperature-dependent separation potential, Proc. Appl. Math. Mech. 16 (2016) 481-482.

E. Sak-Saracino, H. M. Urbassek: The α↔γ transformation of an Fe1−xCrx alloy: A molecular-dynamics approach, Int. J. Mod. Phys. C 27 (2016) 1650124.

J. Meiser, H. M. Urbassek: Martensitic transformation of pure iron at a grain boundary: Atomistic evidence for a two-step Kurdjumov-Sachs–Pitsch pathway, AIP Adv. 6 (2016) 085017.

B. Wang, H. M. Urbassek: Role of the Surface in Solid–Solid Phase Transitions: Molecular Dynamics Study of the α-γ Transition in Fe, Metall. Mater. Trans. A 47 (2016) 2471-2480.

E. Sak-Saracino, H. M. Urbassek: Effect of uni- and biaxial strain on phase transformations in Fe thin films, Int. J. Comput. Mater. Sci. Eng. 05 (2016) 1650001.

N. Gunkelmann, E. M. Bringa, H. M. Urbassek: Influence of phase transition on shock-induced spallation in nanocrystalline iron, J. Appl. Phys. 118 (2015) 185902.

E. Sak-Saracino, H. M. Urbassek: Temperature-induced phase transformation of Fe1-xNix alloys: molecular-dynamics approach, Eur. Phys. J. B 88 (2015) 169.

C. Mücksch, C. Rösch, C. Müller-Renno, C. Ziegler, H. M. Urbassek: Consequences of Hydrocarbon Contamination for Wettability and Protein Adsorption on Graphite Surfaces, J. Phys. Chem. C 119 (2015) 12496-12501.

E. Sak-Saracino, H. M. Urbassek: Free energies of austenite and martensite Fe-C alloys: an atomistic study, Philosophical Magazine 94 (2014) 993-945.

B. Wang, H. M. Urbassek: Molecular dynamics study of the alpha–gamma phase transition in Fe induced by shear deformation, Acta Mater. 61 (2013) 5979-5987.

B. Wang, Y. Gao, H. M. Urbassek: Microstructure and magnetic disorder induced by nanoindentation in single-crystalline Fe. Phys. Rev. B 89 (2014) 104105.

B. Wang, H. M. Urbassek: Atomistic dynamics of the bcc <-> fcc phase transition in iron: Competition of homo- and heterogeneous phase growth, Comp. Mater. Sci. 81 (2014) 170-177.

B. Wang, E. Sak-Saracino, N. Gunkelmann, H. M. Urbassek: Molecular-dynamics study of the α<->γ phase transition in Fe–C, Comp. Mater. Sci. 82 (2014) 399-404.

B. Wang, E. Sak-Saracino, L. Sandoval, H. M. Urbassek: Martensitic and austenitic phase transformations in Fe-C nanowires, Modelling Simul. Mater. Sci. Eng. 22 (2014) 045003.

R. Schmitt, B. Wang, H. M. Urbassek, R. Müller: Modeling of Martensitic Transformations in Pure Iron by a Phase Field Approach Using Information from Atomistic Simulation, Techn. Mech. 33 (2013) 119-130.

R. Schmitt, R. Müller, C. Kuhn, H. M. Urbassek: A phase field approach for multivariant martensitic transformations of stable and metastable phases, Arch. Appl. Mech. 83 (2013) 849-859.

B. Wang, H. M. Urbassek: Phase transitions in an Fe system containing a bcc/fcc phase boundary: An atomistic study, Phys. Rev. B 87 (2013) 104108.

B. Wang, H. M. Urbassek: Computer simulation of strain-induced phase transformations in thin Fe films. Modelling Simul, Mater. Sci. Eng. 21 (2013) 085007.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt A04 (Kuhn, Aurich)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

E. Kerscher, S. Diederichs, N. Ghavidel, A. Keksel, C. Kuhn, R. Müller, J. Seewig, F. J. P. Sousa: Interrelationship of Manufacturing, Surface Morphology, and Properties of Titanium, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 231-255, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_10

S. Kieren-Ehses, L. Böhme, L. Morales-Rivas, J. Lösch, B. Kirsch, E. Kerscher, M. Kopnarski, J. C. Aurich: The influence of the crystallographic orientation when micro machining commercially pure titanium: A size effect, Precis. Eng. 72 (2021) 158-171.

L. Böhme, A. Keksel, F. Ströer, M. Bohley, S. Kieren-Ehses, B. Kirsch, J. C. Aurich, J. Seewig, E. Kerscher: Micro hardness determination on a rough surface by using combined indentation and topography measurements, Surf. Topogr. Metrol. Prop. 7 (2019) 045021.

S. Kieren-Ehses, M. Bohley, B. Kirsch, J. C. Aurich: Influence of the metal working fluid quantity on process results when micro milling cp-titanium with 50 μm diameter micro end mills, 19th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2019) 400-401. ISBN/ISSN: 978-0-9957751-4-5.

R. Bischof, L. Böhme, C. Kuhn, R. Müller, E. Kerscher: Deformation behaviour of small scale cp-titanium specimen with large grains, Proc. Appl. Math. Mech. 18 (2018) 1-2.

M. Bohley, I. G. Reichenbach, S. Kieren-Ehses, L. Heberger, P. A. Arrabiyeh, R. Merz, L. Böhme, J. Hering, B. Kirsch, M. Kopnarski, E. Kerscher, G. von Freymann, J. C. Aurich: Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings, J. Manuf. Mater. Process. 2 (2018) 22.

S. Thielen, B. Magyar, B. Sauer, F. Schneider, P. Mayer, B. Kirsch, R. Müller, E. v. Harbou, J. C. Aurich: Functional investigation of zero lead radial shaft seal counter-surfaces turned with a special method, Tribol. Int. 118 (2018) 442-450.

F. Schneider, J. Das, B. Kirsch, B. Linke, J. C. Aurich: Sustainability in Ultra precision and Micro machining: A Review (accepted), Int. J. Precis. Eng. Manuf. (2018).

R. Bischof, F. Schneider, C. Müller, C. Kuhn, J. C. Aurich, R. Müller: Robust implementation of multi-slip crystal plasticity for micro machining simulations based on Fischer-Burmeister complementary functions, Proc. Appl. Math. Mech. 17 (2017) 407-408.

R. Schmitt, C. Kuhn, R. Müller: On a phase field approach for martensitic transformations in a crystal plastic material at a loaded surface, Continuum Mech. Thermodyn. 29 (2017) 957-968.

C. Müller, M. Bohley, B. Kirsch, J. C. Aurich: A novel rotational air bearing axis for the manufacturing of ultra-small micro end mills, 17th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2017) 144-145. ISBN/ISSN: 978-0-9957751-0-7.

K. Klauer, M. Eifler, F. Schneider, J. Seewig, J. C. Aurich: Ageing of roughness artefacts–impact on the measurement results, 17th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) 17 (2017) 403-404.

M. Eifler, F. Schneider, J. Seewig, B. Kirsch, J. C. Aurich: Manufacturing of new roughness standards for the linearity of the vertical axis – Feasibility study and optimization, Eng. Sci. Technol. 19 (2016) 1993-2001.

R. Bischof, F. Schneider, C. Kuhn, J. C. Aurich, R. Müller: Simulation of micro-cutting considering finite deformation crystal plasticity, Proc. Appl. Math. Mech. 16 (2016) 305-306.

J. C. Aurich, F. Schneider, P. Mayer, B. Kirsch, H. Hasse: Oberflächenerzeugungs-Morphologie-Eigenschafts-Beziehungen: Vom Fertigungsverfahren direkt zu den Bauteileigenschaften, ZWF 111 (2016) 213-216.

J. Seewig, M. Eifler, F. Schneider, B. Kirsch, J. C. Aurich: A model-based approach for the calibration and traceability of the angle resolved scattering light sensor, Surf. Topogr. Metrol. Prop. 4 (2016) 024010.

J. Seewig, M. Eifler, F. Schneider, J. C. Aurich: Design and Verification of Geometric Roughness Standards by Reverse Engineering, Procedia CIRP 45 (2016) 259-262.

F. Schneider, R. Bischof, B. Kirsch, C. Kuhn, R. Müller, J. C. Aurich: Investigation of Chip Formation and Surface Integrity when Micro-cutting cp-Titanium with Ultra-fine Grain Cemented Carbide, Procedia CIRP 45 (2016) 115-118.

R. Lohkamp, C. Kuhn, R. Müller, J. C. Aurich, F. Schneider: Simulation of micro cutting considering crystal plastic deformations, Proc. Appl. Math. Mech. 15 (2015) 331-332.

C. Müller, M. Bohley, F. Schneider, J. C. Aurich: Servo tool for chip formation studies in micro milling, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen) (2015) 307-308. ISBN/ISSN: 978-0-9566790-7-9.

M. Eifler, F. Schneider, M. Bohley, J. C. Aurich, J. Seewig: Contamination of roughness artefacts - impacts on the measurement results, 15th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2015) 119-120. ISBN/ISSN: 978-0-9566790-7-9.

C. Kuhn, R. Müller, D. Gross: Configurational forces in crystal plasticity - An analysis of the influence of grain boundaries on crack driving forces, Arch. Appl. Mech. 84 (2014) 9-11 1427-1439.

C. Kuhn, R. Lohkamp, F. Schneider, J. C. Aurich, R. Müller: Finite Element Computation of Discrete Configurational Forces in Crystal Plasticity, Int. J. Solids Struct. 56-57 (2015) 62-77.

C. Kuhn, R. Lohkamp, R. Müller, F. Schneider, J. C. Aurich: Strategies for the computation of configurational forces in dissipative medi,. Proc. Appl. Math. Mech. - Special Issue: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics 14 (2014) 172-172.

R. Lohkamp, R. Müller, C. Kuhn, F. Schneider, J. C. Aurich: Configurational forces in cutting processes of microstructured titanium, Proc. Appl. Math. Mech. - Special Issue: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics 14 (2014) 331-332.

I. Raid, D. Fröhlich, P. Mayer, F. Schneider, J. C. Aurich, B. Sauer, J. Seewig: Oberflächenmodellierung gedrehter Wellenlaufflächen - Kinematische Simulation zur funktionsorientierten Untersuchung des Einflusses der Prozessparameter auf Drallstrukturen, wt Werkstatttechnik online 104 (2014) 5 279-287.

R. Schmitt, C. Kuhn, R. Müller, K. Bhattacharya: Crystal plasticity and martensitic transformations - A phase field approach, Technische Mechanik 34 (2014) 23-38.

R. Schmitt, P. Mayer, B. Kirsch, J. C. Aurich, C. Kuhn, R. Müller, K. Bhattacharya: A phase field approach for martensitic transformations and crystal plasticity, Proc. Appl. Math. Mech. - Special Issue: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics 14 (2014) 383-384.

F. Schneider, R. Lohkamp, F. J. P. Sousa, R. Müller, J. C. Aurich: Analysis of surface integrity in ultra-precision cutting by investigating the chip formation, Procedia CIRP - 2nd CIRP Conference on Surface Integrity (CSI) 13 (2014) 55-60.

F. Schneider, M. Bohley, R. Lohkamp, F. J. P. Sousa, R. Müller, J. C. Aurich: Development of a Quick-Stop-Device to investigate chip formation in micro- and nano-machining, In: Leach, R. (Hrsg.): Proceedings of the 14th euspen International Conference (2), 2-6 June, 2014, Dubrovnik, 91-94.

R. Lohkamp, R. Müller, F. Schneider, J. C. Aurich: Configurational Forces in Crystal Plasticity. Proc. Appl. Math. Mech. - Special Issue: 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics 13 (2013) 155-156.

C. Ruffing, P. Grad, M. Klassen, R. Müller, E. Kerscher: Experimental and numerical investigation of the microstructural influence on the deformation behavior of notched cp-titanium specimens, Int. J. Mater. Res. 104 (2013) 6, 535-541.

F. Schneider, R. Lohkamp, F. J. P. Sousa, R. Müller, J. C. Aurich: Investigation of the resulting surface in ultra-precision turning of crystalline titanium, In: Leach, R.; Shore, P. (Hrsg.): Proceedings of the 13th euspen International Conference (2), 27-31 Mai, 2013, Berlin, 72-75.

F. Schneider, R. Lohkamp, F. J. P. Sousa, R. Müller, J. C. Aurich: Ultrapräzisionsbearbeitung von cp-Titan - Untersuchung des Einflusses von Größeneffekten auf das Bearbeitungsergebnis, wt Werkstattstechnik online 103 (2013) 11-12, 853-857.

R. Lohkamp, R. Müller, F. Schneider, J. C. Aurich: Multiscale modelling and simulation of micro machining of titanium, Proc. Appl. Math. Mech. - Special Issue: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics 12 (2012) 311-312.

b) Andere Veröffentlichungen

F. Schneider, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich: Praxisnahe Kalibrierung von Messgeräten - Entwicklung und Fertigung von Kalibriernormalen auf Basis realer Bauteiloberflächen, VDI-Z Integrierte Produktion 157 (2015) 32-34.

F. Schneider, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich: Entwicklung und Fertigung von Geometrienormalen auf Basis realer Bauteiloberflächen, Unter Span 2 (2015) 23-24.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt A05 (Müller)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

T. Beck, M. Smaga, S. Antonyuk, D. Eifler, R. Müller, H. M. Urbassek, T. Zhu: Influence of Manufacturing and Load Conditions on the Phase Transformation and Fatigue of Austenitic Stainless Steels, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 257-288, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_11

H. K. Thammineni, T. Zhu, M. Smaga, T. Beck, R. Müller: Numerical modelling of stress‐strain response and deformation‐induced martensite in metastable austenitic stainless steels under monotonic tensile loading, Proc. Appl. Math. Mech. 22 (2023).

H. K. Thammineni, T. Zhu, M. Smaga, T. Beck, R. Müller: Constitutive modelling of the deformation‐induced martensite transformation observed in metastable austenitic CrNi steels, Proc. Appl. Math. Mech. 21 (2021).

F. Diewald, M. Heier, M. Lautenschläger, M. Horsch, C. Kuhn, K. Langenbach, H. Hasse, R. Müller: A Navier-Stokes-Korteweg Model for Dynamic Wetting based on the PeTS Equation of State, Proc. Appl. Math. Mech. 19 (2019) e201900091.

J. Meiser, I. A. Alhafez, T. Beck, M. Smaga, R. Müller, H. M. Urbassek: Nanoindentation into a metastable austenite triggers the martensitic phase transformation—An atomistic study, AIP Adv. 9 (2019) 015228.

F. Diewald, M. Heier, M. Horsch, C. Kuhn, K. Langenbach, H. Hasse, R. Müller: Three-dimensional phase field modeling of inhomogeneous gas-liquid systems using the PeTS equation of state, J. Chem. Phys. 149 (2018) 064701.

F. Diewald, C. Kuhn, M. Heier, K. Langenbach, M. Horsch, H. Hasse, R. Müller: Investigating the stability of the phase field solution of equilibrium droplet configurations by eigenvalues and eigenvectors, Comput. Mater. Sci. 141 (2018) 185-192.

S. Schmidt, R. Müller: Heat Conduction in a Phase Field Model for Martensitic Transformation, Proc. Appl. Math. Mech. 17 (2018) 561-562.

S. Schmidt, M. W. Klein, A. Boemke, M. Smaga, T. Beck, R. Müller: Investigation of austenitic TRIP steels by means of a phase field model, Proc. Appl. Math. Mech. 18 (2018) e201800369.

S. Schmidt, W. Dornisch, R. Müller: A phase field model for martensitic transformation coupled with the heat equation, GAMM-Mitteilungen 40 (2017) 138-153.

F. Diewald, C. Kuhn, M. Heier, M. Horsch, K. Langenbach, H. Hasse, R. Müller: Surface Wetting with Droplets: A Phase Field Approach, Proc. Appl. Math. Mech. 17 (2017) 501-502.

A. Schlüter, C. Kuhn, T. Noll, F. Diewald, R. Müller: Numerical Solution Strategies for a Dynamic Phase Field Fracture Model, Appl. Mech. Mater. 869 (2017) 29-49.

R. Schmitt, C. Kuhn, R. Müller: On a phase field approach for martensitic transformations in a crystal plastic material at a loaded surface, Continuum Mech. Thermodyn. 29 (2017) 957-968.

S. Schmidt, C. Plate, R. Müller, R. Müller, J. Meiser, H. M. Urbassek: A phase field model for martensitic transformations with a temperature-dependent separation potential, Proc. Appl. Math. Mech. 16 (2016) 481-482.

F. Diewald, C. Kuhn, R. Blauwhoff, M. Heier, S. Becker, S. Werth, M. Horsch, H. Hasse, R. Müller: Simulation of Surface Wetting by Droplets Using a Phase Field Model, Proc. Appl. Math. Mech. 16 (2016) 519-520.

F. Schneider, R. Bischof, B. Kirsch, C. Kuhn, R. Müller, J. C. Aurich: Investigation of Chip Formation and Surface Integrity when Micro-cutting cp-Titanium with Ultra-fine Grain Cemented Carbide, Procedia CIRP 45 (2016) 115-118.

R. Schmitt, C. Kuhn, R. Skorupski, M. Smaga, D. Eifler, R. Müller: A combined phase field approach for martensitic transformations and damage, Arch. Appl. Mech. 85 (2015) 1459-1468.

R. Schmitt, C. Kuhn, R. Müller, K. Bhattacharya: Crystal plasticity and martensitic transformations - A phase field approach, Techn. Mech. 34/1 (2014) 23-38.

R. Schmitt, P. Mayer, B. Kirsch, J. Aurich, C. Kuhn, R. Müller, K. Bhattacharya: A Phase Field Approach for Martensitic Transformations and Crystal Plasticity, Proc. Appl. Math. Mech. 14 (2014) 383 – 384.

R. Skorupski, M. Smaga, D. Eifler, R. Schmitt, R. Müller: Influence of morphology of deformation induced α‘-martensite on stress-strain response in a two phase austenitic-martensitic-steel, Key Eng. Mater. 592-593 (2014) 582-585.

R. Schmitt, C. Kuhn, R. Müller, H. M. Urbassek: A phase field approach for multivariant martensitic transformations of stable and metastable phases, Arch. Appl. Mech. 83/6 (2013) 849-859.

R. Schmitt, B. Wang, H. M. Urbassek, R. Müller: Modeling of martensitic transformations in pure iron by a phase field approach using information from atomistic simulation, Techn. Mech. 33/2 (2013) 119-130.

R. Schmitt, R. Müller, R. Skorupski, M. Smaga, D. Eifler: A phase field approach for martensitic transformations in elastoplastic materials, Proc. Appl. Math. Mech. 13 (2013) 213-214.

R. Schmitt, C. Kuhn, R. Müller: A phase field model for martensitic transformations, Proc. Appl. Math. Mech. 12 (2012) 261-262.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt A08 (Antonyuk)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

K. M. de Payrebrune, C. Schönecker, S. Antonyuk, R. Bilz, F. Krull, I. Noichl, S. Ripperger, D. Strohner: Interactions Between Particles and Surfaces, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 173-201, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_8

F. Krull, D. Strohner, J. Hering-Stratemeier, G. von Freymann, S. Antonyuk: Measurements of micro particle rotation by applying marking points using additive manufacturing tools, Adv. Powder Technol. 34 (2023) 104218. DOI: 10.1016/j.apt.2023.104218

D. Strohner, S. Antonyuk: Experimental and numerical determination of the lubrication force between a spherical particle and a micro-structured surface, Adv. Powder Technol. 34 (2023).

F. Krull, J. Mathy, P. Breuninger, S. Antonyuk: Influence of the surface roughness on the collision behavior of fine particles in ambient fluids, Powder Technol. 392 (2021) 58-68.

R. Hesse, F. Krull, S. Antonyuk: Experimentally calibrated CFD-DEM study of air impairment during powder discharge for varying hopper configurations, Powder Technol. 372 (2020) 404-419.

P. Breuninger, F. Krull, K. Huttenlochner, C. Müller-Reno, C. Ziegler, R. Merz, M. Kopnarski, S. Antonyuk: Microstructuring of steel surfaces via cold spraying with 316L particles for studying the particle-wall collision behavior, Surf. Coat. Technol. 379 (2019) 125054.

D. Weis, F. Krull, J. Mathy, M. Evers, M. Thommes, S. Antonyuk: A contact model for the deformation behaviour of pharmaceutical pellets under cyclic loading, Adv. Powder Technol. 30 (2019) 2492-2502.

P. Breuninger, F. Krull, S. Buhl, A. Binder, R. Merz, M. Kopnarski, B. Sachweh, S. Antonyuk: Microstructuring of titanium surfaces with plasma-modified titanium particles by cold spraying, Particuology 44 (2019) 90-104.

P. Breuninger, D. Weis, I. Behrendt, P. Grohn, F. Krull, S. Antonyuk: CFD–DEM simulation of fine particles in a spouted bed apparatus with a Wurster tube, Particuology 42 (2019) 114-125.

F. Krull, R. Hesse, P. Breuninger, S. Antonyuk: Impact behaviour of microparticles with microstructured surfaces: Experimental study and DEM simulation, Chem. Eng. Res. Des. 135 (2018) 175-184.

F. Krull, P. Breuninger, S. Antonyuk: Dynamic interactions of polystyrene particles with microstructured surface manufactured by cold spray, Eur. Phys. J. WOC 140 (2017) 13011.

b) Andere Veröffentlichungen

P. Breuninger, F. Krull, S. Antonyuk: Manufacturing and characterization of particle structured 1.4571 surfaces with a cold spray method, Surface Modification Technology Conference (SMT31) (2017).

F. Krull, S. Antonyuk: Einfluss der Bauteiloberflächenstrukturierung auf das Stoßverhalten von Partikeln, Chem. Ing. Tech. 88 (2016) 1353-1353.

H. Hasse, S. Antonyuk, R. Ulber: Bauteiloberflächen – Morphologie auf der Mikroskala, Chem. Ing. Tech. 88 (2016) 1298-1298.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt A09 (de Payrebrune)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

K. M. de Payrebrune, C. Schönecker, S. Antonyuk, R. Bilz, F. Krull, I. Noichl, S. Ripperger, D. Strohner: Interactions Between Particles and Surfaces, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 173-201, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_8

R. Bilz, K. M. de Payrebrune: Simplified description of hard particles in tribological systems using statistical sample particles, Proc. Appl. Math. Mech. (2023) e202300106.

R. Bilz, K. M. de Payrebrune: Development of a simple substitute model to describe the normal force of fluids in narrow gaps, Proc. Appl. Math. Mech. 22 (2023).

S. Schmidt, M. Eifler, J. C. Issel, K. M. de Payrebrune, F. Ströer, A. Karatas, J. Seewig: Parameter Identification of an Abrasive Manufacturing Process With Machine Learning of Measured Surface Topography Information, J. Comput. Inf. Sci. Eng. 22 (2022) 041010-1-04101015.

R. Bilz, P. Sridhar, K. M. de Payrebrune: Parameter identification aspects of tribological systems containing hard particles, PAMM Proc. Appl. Math. Mech. 21 (2021) e2021000018.

L. Luberto, K. M. de Payrebrune: Examination of laminar Couette flow with obstacles by a low-cost particle image velocimetry setup, Phys. Fluids 33 (2021).

R. Bilz, K. M. de Payrebrune: Investigation of the influence of velocity in a tribological three-body system containing a single layer of rolling hard particles from a mechanical point of view, Tribol. Int. 159 (2021).

P. Sridhar, D. Mannherz, R. Bilz, K. M. de Payrebrune, M. R. G. Prasad, J. M. R. Prieto: Physical Modeling of Process Forces in Grinding, 2nd International Conference of the DFG International Research Training Group 2057 - Physical Modeling for Virtual Manufacturing, Dagstuhl, Germany 89 (2021) 16:11-16:20. DOI: 10.4230/OASIcs.iPMVM.2020.16. ISBN/ISSN: 978-3-95977-183-2.

K. M. de Payrebrune: Relation of kinematics and contact forces in three-body systems with a limited number of particles, Facta Universitatis, Series: Mechanical Engineering (2021).

P. Sridhar, M. R. G. Prasad, R. Bilz, M. W. Klein, N. Vajragupta, K. M. de Payrebrune, M. Smaga: A comparative study of an isotropic and anistropic model to describe the micro‐indentation of TWIP steel, PAMM Proc. Appl. Math. Mech. 20 (2020).

R. Bilz, K. M. de Payrebrune: Analytical investigation of the motion of lapping particles, PAMM Proc. Appl. Math. Mech. 19 (2019) e201900076.

L. Luberto, K. M. de Payrebrune: Numerical and experimental investigation on the flow behavior of liquids in narrow gaps, PAMM Proc. Appl. Math. Mech. 19 (2019) e201900143.

P. Sridhar, D. Fares, K. M. de Payrebrune: Investigation of process parameter influences in single grain scratch simulations, PAMM Proc. Appl. Math. Mech. 18 (2018) e201800357.

b) Andere Veröffentlichungen

R. Bilz, K. M. de Payrebrune: Simulation of non-spherical particles in tribological three-body systems, ECOMAS Congress 2022, Oslo, Norway (2022). DOI: 10.23967/eccomas.2022.249.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt A10 (Schönecker)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

K. M. de Payrebrune, C. Schönecker, S. Antonyuk, R. Bilz, F. Krull, I. Noichl, S. Ripperger, D. Strohner: Interactions Between Particles and Surfaces, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 173-201, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_8

R. Ulber, S. Antonyuk, J. C. Aurich, T. Beck, M. Bozoglu, G. v. Freymann, S. Kieren-Ehses, C. Müller-Renno, K. Muffler, A. Schmeckebier, C. Schönecker, J. Seewig, M. Smaga, J. Stiefelmaier, D. Strieth, A. Zayed, C. Ziegler, S. Zimmermann: Manufacturing-Morphology-Property Relationships for Biofilms, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 411-442, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_17

I. Noichl, C. Schonecker: Dynamics of elastic, nonheavy spheres sedimenting in a rectangular duct, Soft Matter 18 (2022) 2462-2472.

B. Saintyves, B. Rallabandi, T. Jules, J. Ault, T. Salez, C. Schönecker, H. A. Stone, L. Mahadevan: Rotation of a submerged finite cylinder moving down a soft incline, Soft Matter 16 (2020) 4000-4007.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B01 (Aurich)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

J. C. Aurich, N. Altherr, S. Kieren-Ehses, B. Kirsch, T. Mayer: Creating Surface Morphologies by Micro Milling and Micro Grinding, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 67-95, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_4

S. Kieren-Ehses, T. Mayer, B. Kirsch, J. C. Aurich: Influence of the parameters of a minimum quantity lubrication system on micro milling process results, Int. J. Adv. Manuf. Technol. (2023).

S. Kieren-Ehses, T. Mayer, B. Kirsch, J. C. Aurich: Indirect workpiece cooling system for micro milling based on a Peltier element, Proceedings of the 23rd Euspen International Conference, Copenhagen, DK (2023) 473-476.

S. Kieren-Ehses, B. Kirsch, J. C. Aurich: Process intermittent quantitative analysis of the wear of ultra-small micro end mills, CIRP Ann. (2023).

T. Mayer, S. Kieren-Ehses, B. Kirsch, J. C. Aurich: Micro milling of brass and commercially pure titanium with all-ceramic micro end mills made from four different ceramic tool substrates, Proceedings of the 22nd euspen International Conference, Geneva, CH (2022) 455-458.

T. Mayer, S. Kieren-Ehses, B. Kirsch, J. C. Aurich: Dressing of grinding wheels for the manufacture of all-ceramic micro end mills, Proceedings of the 22nd euspen International Conference, Geneva, CH (2022) 479-482.

T. Mayer, S. Kieren-Ehses, B. Kirsch, J. C. Aurich: Herstellung und Anwendung vollkeramischer Mikroschaftfräser, ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 117 (2022) 7-8.

J. C. Aurich, S. Kieren-Ehses, T. Mayer, M. Bohley, B. Kirsch: An investigation of the influence of the coating on the tool lifetime and surface quality for ultra-small micro end mills with different diameters, CIRP J. Manuf. Sci. Technol. 37 (2022) 92-102.

S. Greco, S. Kieren-Ehses, B. Kirsch, J.C. Aurich: Micro milling of additively manufactured AISI 316L: impact of the layerwise microstructure on the process results. Int. J. Adv. Manuf. Technol.  112/1-2 (2021) 361-373. DOI: 10.1007/s00170-020-06387-3

T. Mayer, S. Kieren-Ehses, B. Kirsch, C. J. Aurich: Atomic force microscope for in situ micro end mill characterization - Part II: Development of an algorithm to characterize the cutting edge radius of micro end mills, euspen's 21st International Conference & Exhibition, Copenhagen, DK (2021).

S. Kieren-Ehses, T. Mayer, B. Kirsch, C. J. Aurich: Atomic force microscope for in situ micro end mill characterization - Part I: Integration into a desktop sized machine tool, euspen's 21st International Conference & Exhibition, Copenhagen, DK (2021).

S. Kieren-Ehses, L. Böhme, L. Morales-Rivas, J. Lösch, B. Kirsch, E. Kerscher, M. Kopnarski, J. C. Aurich: The influence of the crystallographic orientation when micro machining commercially pure titanium: A size effect, Precis. Eng. 72 (2021) 158-171.

P. A. Arrabiyeh, M. Heintz, S. Kieren-Ehses, M. Bohley, B. Kirsch, J. C. Aurich: Submerged micro grinding: a metalworking fluid application study, Int. J. Adv. Manuf. Technol. 107 (2020) 3807-3815.

T. Mayer, S. Kieren-Ehses, M. Heintz, B. Kirsch, J. C. Aurich: Manufacture of novel all‐ceramic micro end mills, 20th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) Geneva (2020) 113-114.

S. Kieren-Ehses, M. Bohley, T. Mayer, B. Kirsch, J. C. Aurich: Effect of high spindle speeds on micro end milling of commercially pure titanium, 20th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) Geneva (2020) 63-66.

M. Bohley, L. Heberger, S. Kieren-Ehses, B. Kirsch, J. C. Aurich: An antistatic device to decrease friction induced electrostatic charge in precision machining processes, 20th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) Geneva (2020) 61-62.

L. Böhme, A. Keksel, F. Ströer, M. Bohley, S. Kieren-Ehses, B. Kirsch, J. C. Aurich, J. Seewig, E. Kerscher: Micro hardness determination on a rough surface by using combined indentation and topography measurements, Surf. Topogr. Metrol. Prop. 7 (2019) 045021.

S. Kieren-Ehses, M. Bohley, B. Kirsch, J. C. Aurich: Influence of the metal working fluid quantity on process results when micro milling cp-titanium with 50 μm diameter micro end mills, 19th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2019) 400-401. ISBN/ISSN: 978-0-9957751-4-5.

I. G. Reichenbach, M. Bohley, F. J. P. Sousa, J. C. Aurich: Tool-life criteria and wear behavior of single-edge ultra-small micro end mills, Precis. Eng. 55 (2019) 48-58.

K. Huttenlochner, N. Davoudi, C. Schlegel, M. Bohley, C. Müller-Renno, J. C. Aurich, R. Ulber, C. Ziegler: Paracoccus seriniphilus adhered on surfaces: Resistance of a seawater bacterium against shear forces under the influence of roughness, surface energy, and zeta potential of the surfaces, Biointerphases 13 (2018) 051003.

I. G. Reichenbach, M. Bohley, F. J. P. Sousa, J. C. Aurich: Micromachining of PMMA—manufacturing of burr-free structures with single-edge ultra-small micro end mills, Int. J. Adv. Manuf. Technol. 96 (2018) 3665-3677.

M. Bohley, I. G. Reichenbach, S. Kieren-Ehses, L. Heberger, P. A. Arrabiyeh, R. Merz, L. Böhme, J. Hering, B. Kirsch, M. Kopnarski, E. Kerscher, G. von Freymann, J. C. Aurich: Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings, J. Manuf. Mater. Process. 2 (2018) 22.

S. Kieren-Ehses, M. Bohley, P. Arrabiyeh, B. Kirsch, J. C. Aurich: Influence of different metal working fluids when micro machining cp-titanium with 50 µm diameter micro end mills, Procedia CIRP 71 (2018) 198-202.

M. Bohley, S. Kieren-Ehses, L. Heberger, B. Kirsch, J. C. Aurich: Size limitations and wear behavior of TiB2 coated micro end mills (Ø < 50 µm) when machining cp-titanium, Procedia CIRP 71 (2018) 187-191.

N. Davoudi, K. Huttenlochner, J. Chodorski, C. Schlegel, M. Bohley, C. Müller-Renno, J. C. Aurich, R. Ulber, C. Ziegler: Adhesion forces of the sea-water bacterium Paracoccus seriniphilus on titanium: Influence of microstructures and environmental conditions, Biointerphases 12 (2017) 05G606.

P. A. Arrabiyeh, M. Bohley, F. Ströer, B. Kirsch, J. Seewig, J. C. Aurich: Experimental Analysis for the Use of Sodium Dodecyl Sulfate as a Soluble Metal Cutting Fluid for Micromachining with Electroless-Plated Micropencil Grinding Tools, Inventions 2 (2017) 29.

M. Bohley, L. Heberger, B. Kirsch, J. C. Aurich: Untersuchung des Verschleißverhaltens von TiB2-beschichteten Mikrofräswerkzeugen, ZWF 112 (2017) 598-601.

B. Kirsch, M. Bohley, P. A. Arrabiyeh, J. C. Aurich: Application of Ultra-Small Micro Grinding and Micro Milling Tools: Possibilities and Limitations, Micromachines 8 (2017) 261.

C. Schlegel, J. Chodorski, M. Huster, N. Davoudi, K. Huttenlochner, M. Bohley, I. Reichenbach, S. Buhl, P. Breuninger, C. Müller-Renno, C. Ziegler, J. Aurich, S. Antonyuk, R. Ulber: Analyzing the influence of microstructured surfaces on the lactic acid production of Lactobacillus delbrueckii lactis in a flow-through cell system, Eng. Life Sci. 17 (2017) 865-873.

J. C. Aurich, C. Müller, M. Bohley, P. Arrabiyeh, B. Kirsch: Recent Developments in Desktop-Sized Machine Tools, Solid State Phenom. 261 (2017) 425-431.

C. Müller, M. Bohley, B. Kirsch, J. C. Aurich: A novel rotational air bearing axis for the manufacturing of ultra-small micro end mills, 17th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2017) 144-145. ISBN/ISSN: 978-0-9957751-0-7.

M. Bohley, C. Müller, B. Kirsch, J. C. Aurich: Integration of a confocal microscope in a desktop machine tool for in situ process control, 17th  International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2017) 122-123. ISBN/ISSN: 978-0-9957751-0-7.

J. C. Aurich, M. Bohley, I. G. Reichenbach, B. Kirsch: Surface quality in micro milling: Influences of spindle and cutting parameters, CIRP Ann. 66 (2017) 101-104.

C. Müller, I. G. Reichenbach, M. Bohley, J. C. Aurich: In Situ Topology Measurement of Micro Structured Surfaces with a Confocal Chromatic Sensor on a Desktop Sized Machine Tool, Adv. Mater. Res. 1140 (2016) 392-399.

P. Arrabiyeh, V. Raval, B. Kirsch, M. Bohley, J. C. Aurich: Electroless Plating of Micro Pencil Grinding Tools with 5-10 μm Sized cBN Grits, Adv. Mater. Res. 1140 (2016) 133-140.

M. Bohley, I. G. Reichenbach, C. Müller, B. Kirsch, J. C. Aurich: Compact hydrodynamic spindle module for micromachining applications, 16th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) 30 (2016). ISBN/ISSN: 978-0-9566790-8-6.

J. C. Aurich, F. Schneider, P. Mayer, B. Kirsch, H. Hasse: Oberflächenerzeugungs-Morphologie-Eigenschafts-Beziehungen: Vom Fertigungsverfahren direkt zu den Bauteileigenschaften, ZWF 111 (2016) 213-216.

M. Bohley, I. G. Reichenbach, C. Müller, J. C. Aurich: Development of a desktop machine tool for integrated ultra-small micro end mill production and application, Proceedings of the 11th International Conference on Micromanufacturing (ICOMM), Irvine, USA (2016) 29-31.

M. Smaga, T. Beck, P. Arrabiyeh, I. Reichenbach, B. Kirsch, J. C. Aurich: Characterization of micro machined surface from TRIP/TWIP steels, MATEC Web Conf. 33 (2015) 07004. DOI: 10.1051/matecconf/20153307004.

C. Godard, M. Bohley, J. C. Aurich, E. Kerscher: Deformation behaviour of micro-milled cp-titanium specimens under tensile loading, Int. J. Mater. Res. 106 (2015) 572-579.

I. G. Reichenbach, M. Bohley, J. C. Aurich: TiAlN coated ultra-small micro end mills, 15th  International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2015) 321-323. ISBN/ISSN: 978-0-9566790-7-9.

C. Müller, M. Bohley, F. Schneider, J. C. Aurich: Servo tool for chip formation studies in micro milling, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen) (2015) 307-308. ISBN/ISSN: 978-0-9566790-7-9.

M. Eifler, F. Schneider, M. Bohley, J. C. Aurich, J. Seewig: Contamination of roughness artefacts - impacts on the measurement results, 15th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2015) 119-120. ISBN/ISSN: 978-0-9566790-7-9.

M. Fingerle, O. Köhler, C. Rösch, F. Kratz, C. Scheibe, N. Davoudi, C. Müller-Renno, C. Ziegler, M. Huster, C. Schlegel, R. Ulber, M. Bohley, J. C. Aurich: Cleaning of titanium substrates after application in a bioreactor, Biointerphases 10 (2015) 019007.

M. Bohley, R. Merz, C. Müller-Renno, I. G. Reichenbach, N. Davoudi, C. Ziegler, M. Kopnarski, J. C. Aurich: Werkzeug-Werkstück Interaktion beim Mikrofräsen - Charakterisierung des Wirkpaarverhaltens anhand von Spanbildungs- und Oberflächenuntersuchungen, wt Werkstattstechnik online 9 (2014) 586-591.

F. Schneider, M. Bohley, R. Lohkamp, F. J. P. Sousa, R. Müller, J. C. Aurich: Development of a Quick-Stop-Device to investigate chip formation in micro- and nano-machining, Proceedings of the 14th euspen International Conference - Dubrovnik - June 2014, 91-94.

M. Walk, M. Bohley, J. C. Aurich: A new workpiece clamping method for micromachining applications based on van der Vaal forces, Proceedings of the 14th euspen International Conference - Dubrovnik - June 2014, 335-338.

C. Müller-Renno, S. Buhl, N. Davoudi, J. C. Aurich, S. Ripperger, R. Ulber, K. Muffler, Ch. Ziegler: Novel Materials for Biofilm Reactors and their Characterization, Adv. Biochem. Eng. Biotechnol. (2013) 207-233. DOI: 10.1007/10_2013_264.

K. Muffler, C. Schlegel, C. Ziegler, J. C. Aurich, R. Ulber: Produktive Biofilme - Wechselwirkung zwischen Oberflächenmorphologie & Stoffwechsel, Biospektrum 2 (2013) 216-217.

I. G. Reichenbach, J. C. Aurich: Untersuchung der Oberflächengüte beim Mikrofräsen - Einfluss von Prozessparametern und Einstellwinkel der Nebenschneide bei 48 µm Mikroschaftwerkzeugen, wt Werkstattstechnik online 11/12 (2013) 847-852.

I. G. Reichenbach, M. Bohley: Micromachining of cp-titanium on a desktop machine - Study on bottom surface quality in micro end milling, in: Merklein, M.; Franke, J.; Hagenah, H. (Hrsg.): Advanced Materials Research Vol. 769 - Proceedings of the WGP Congress 2013 - Progress in Production Engineering, 22-23 Juli, 2013, Erlangen, Deutschland, 53-60.

I. G. Reichenbach, S. Becker, H. Hasse, J. C. Aurich: Machining hydrophobic structures with ultra-small micro end mills, Proceedings of the 14th euspen International Conference - Dubrovnik - June 2014, 136-139.

J. C. Aurich, I. G. Reichenbach, G. M. Schüler: Manufacture and application of ultra-small micro end mills, CIRP Ann. - Manuf. Technol. 61 (2012) 83-86.

b) Andere Veröffentlichungen

L. Böhme, A. Hebestreit, S. Kieren-Ehses, M. Bohley, B. Kirsch, J. C. Aurich, E. Kerscher: Präparation dünner Stege zur Bestimmung der kristallographischen Orientierung und deren Einfluss bei der Zerspanung von Reintitan auf der Mikroskala, in: A. Neidel (eds.): Fortschritte in der Metallographie, pp. 143-148, Werkstoff-Informationsgesellschaft (2019). ISBN/ISSN: 978-3-88355-415-0.

M. Bohley, S. Kieren-Ehses, B. Kirsch, J. C. Aurich: Die gesamte Prozesskette der Mikrofräsbearbeitung, MAV Innovation in der spanenden Fertigung 11 (2017) 18-21.

C. Schlegel, N. Wesuls, A. Pasteur, C. Müller, I. G. Reichenbach, C. Ziegler, J. Aurich, K. Muffler, R. Ulber: Charakterisierung produktiver Biofilme auf mikrostrukturierten Bauteiloberflächen, 16. Heiligenstädter Kolloquium, Heilbad Heiligenstadt, September 2012, 63 -67. ISBN: 978-3-00-039458-4.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B02 (Kirsch, Aurich, Müller)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

B. Kirsch, J. C. Aurich, K. Gutzeit, E. v. Harbou, H. Hasse, R. Müller: Creating Surface Morphologies by Cryogenic Machining, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 97-123, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_5

S. Thielen, P. Breuninger, H. Hotz, C. Burkhart, T. Schollmayer, B. Sauer, S. Antonyuk, B. Kirsch, J. C. Aurich: Improving the tribological properties of radial shaft seal countersurfaces using experimental micro peening and classical shot peening processes, Tribol. Int. 155 (2021).

H. Hotz, B. Kirsch, T. Zhu, M. Smaga, T. Beck, J. C. Aurich: Surface layer hardening of metastable austenitic steel – Comparison of shot peening and cryogenic turning, Journal of Materials Research and Technology 9 (2020) 16410-16422.

S. Basten, B. Kirsch, R. Merz, M. Kopnarski, H. Hasse, C. J. Aurich: Adsorption and reaction layers when turning AISI 304 using various cooling strategies, Procedia CIRP 87 (2020) 125-130.

H. Hotz, M. Smaga, B. Kirsch, T. Zhu, T. Beck, J. C. Aurich: Characterization of the subsurface properties of metastable austenitic stainless steel AISI 347 manufactured in a two-step turning process, Procedia CIRP 87 (2020) 35-40.

H. Hotz, B. Kirsch, J. C. Aurich: Estimation of process forces when turning with varying chamfer angles at different feed rates, Procedia CIRP 88 (2020) 300-305.

H. Hotz, B. Kirsch, J. C. Aurich: Impact of the thermomechanical load on subsurface phase transformations during cryogenic turning of metastable austenitic steels, J. Intell. Manuf. (2020).

M. Glatt, H. Hotz, P. Kölsch, A. Mukherjee, B. Kirsch, J. C. Aurich: Predicting the martensite content of metastable austenitic steels after cryogenic turning using machine learning, Int. J. Adv. Manuf. Technol. (2020).

H. Hotz, M. Glatt, B. Kirsch, J. C. Aurich: Quality protection of technical products – Unique identification with a hidden fingerprint in smart materials, Materials Letters: X (2020) 100056.

H. Hotz, B. Kirsch: Influence of tool properties on thermomechanical load and surface morphology when cryogenically turning metastable austenitic steel AISI 347, Journal of Manufacturing Processes 52 (2020) 120-131.

S. Becker, H. Hotz, B. Kirsch, J. C. Aurich, R. Müller: Application of model order reduction to a finite element model of cryogenic turning, Proc. Appl. Math. Mech. 19 (2019) e201900239.

H. Hotz, B. Kirsch, S. Becker, R. Müller, J. C. Aurich: Combination of cold drawing and cryogenic turning for modifying surface morphology of metastable austenitic AISI 347 steel, Journal of Iron and Steel Research International 26 (2019) 1188-1198.

B. Kirsch, H. Hotz, R. Müller, S. Becker, A. Boemke, M. Smaga, T. Beck, J. C. Aurich: Generation of deformation-induced martensite when cryogenic turning various batches of the metastable austenitic steel AISI 347, Production Engineering (2019) 1-8.

S. Becker, H. Hotz, B. Kirsch, J. C. Aurich, E. von Harbou, R. Müller: The Influence of Cooling Nozzle Positions on the Transient Temperature Field during Cryogenic Turning of Metastable Austenitic Steel AISI 347, Proc. Appl. Math. Mech. 18 (2018) e201800447.

P. Mayer, B. Kirsch, C. Müller, H. Hotz, R. Müller, S. Becker, E. v. Harbou, R. Skorupski, A. Boemke, M. Smaga, D. Eifler, T. Beck, J. C. Aurich: Deformation induced hardening when cryogenic turning, CIRP J. Manuf. Sci. Technol. 23 (2018) 6-19.

H. Hotz, B. Kirsch, S. Becker, R. Müller, J. C. Aurich: Bewertung der Oberflächenmorphologie kryogen gedrehter Werkstücke, ZWF 113 (2018) 592-595.

S. Becker, H. Hotz, B. Kirsch, J. C. Aurich, E. V. Harbou, R. Müller: A Finite Element Approach to Calculate Temperatures Arising During Cryogenic Turning of Metastable Austenitic Steel AISI 347, J. Manuf. Sci. Eng. 140 (2018) 101016.

Z. Zou, M. A. Scott, M. J. Borden, D. C. Thomas, W. Dornisch, E. Brivadis: Isogeometric Bézier dual mortaring: Refineable higher-order spline dual bases and weakly continuous geometry, Computer Methods in Applied Mechanics and Engineering 333 (2018) 497-534.

S. Thielen, B. Magyar, B. Sauer, F. Schneider, P. Mayer, B. Kirsch, R. Müller, E. v. Harbou, J. C. Aurich: Functional investigation of zero lead radial shaft seal counter-surfaces turned with a special method, Tribol. Int. 118 (2018) 442-450.

H. Hotz, B. Kirsch, S. Gutwein, S. Becker, E. v. Harbou, R. Müller, J. C. Aurich: Kryogenes Drehen von X6CrNiNb18-10 - Einfluss des Schneidkantenradius auf Prozesskräfte und Prozessergebnisgrößen, wt Werkstatttechnik online 108 (2018) 12-17.

H. Hotz, B. Kirsch, S. Becker, E. von Harbou, R. Müller, J. C. Aurich: Modification of surface morphology during cryogenic turning of metastable austenitic steel AISI 347 at different parameter combinations with constant CO2 consumption per cut, Proceedings of the 8th CIRP Conference on High Performance Cutting, Budapest, Hungary 77 (2018) 207-210. DOI: 10.1016/j.procir.2018.08.287.

H. Hotz, B. Kirsch, S. Becker, E. von Harbou, R. Müller, J. C. Aurich: Improving the surface morphology of metastable austenitic steel AISI 347 in a two-step turning process, Proceedings of the 4th CIRP Conference on Surface Integrity, Tianjin, China 71 (2018) 160-165. DOI: 10.1016/j.procir.2018.05.090.

H. Hotz, B. Kirsch, P. Mayer, S. Becker, E. v. Harbou, A. Boemke, R. Skorupski, M. Smaga, R. Müller, T. Beck, J. C. Aurich: Surface integrity of cryogenic turned austenitic stainless steels AISI 347 and AISI 904L, 7. WGP-Jahreskongress, Aachen (2017) 473-480. ISBN/ISSN: 978-3-86359-555-5.

S. Becker, H. Hotz, B. Kirsch, J. C. Aurich, E. v. Harbou, R. Müller: Estimation of Heat Transfer Properties for the FE Simulation of Cryogenic Turning, Proc. Appl. Math. Mech. 17 (2017) 401-402.

M. Smaga, R. Skorupski, P. Mayer, B. Kirsch, J. C. Aurich, I. Raid, J. Seewig, J. Man, D. Eifler, T. Beck: Influence of surface morphology on fatigue behavior of metastable austenitic stainless steel AISI 347 at ambient temperature and 300°C, Procedia Struct. Integrity 5 (2017) 989-996.

S. Becker, P. Mayer, B. Kirsch, J. C. Aurich, E. v. Harbou, R. Müller: Transient Finite Element Simulation of the Temperature Field during Cryogenic Turning of Metastable Austenitic Steel AISI 347, Proc. Appl. Math. Mech. 16 (2016) 303-304.

S. Basten, P. Mayer, B. Kirsch, H. Hasse, J. C. Aurich: Kryogener Kühlschmierstoff auf der Basis von Ethylenglykol, ZWF 111 (2016) 444-448.

J. C. Aurich, F. Schneider, P. Mayer, B. Kirsch, H. Hasse: Oberflächenerzeugungs-Morphologie-Eigenschafts-Beziehungen: Vom Fertigungsverfahren direkt zu den Bauteileigenschaften, ZWF 111 (2016) 213-216.

P. Mayer, B. Kirsch, R. Müller, S. Becker, E. v. Harbou, J. C. Aurich: Influence of Cutting Edge Geometry on Deformation Induced Hardening when Cryogenic Turning of Metastable Austenitic Stainless Steel AISI 347, Proceedings of the 3rd CIRP Conference on Surface Integrity, Charlotte, USA 45 (2016) 59-62. DOI: 10.1016/j.procir.2016.02.148.

D. Frölich, B. Magyar, B. Sauer, P. Mayer, B. Kirsch, J. C. Aurich, R. Skorupski, M. Smaga, T. Beck, D. Eifler: Investigation of wear resistance of dry and cryogenic turned metastable austenitic steel shafts and dry turned and ground carburized steel shafts in the radial shaft seal ring system, Wear 328-329 (2015) 123-131.

J. C. Aurich, P. Mayer, B. Kirsch, D. Eifler, M. Smaga, R. Skorupski: Characterization of deformation induced surface hardening during cryogenic turning of AISI 347, CIRP Ann. Manuf. Technol. 63 (2014) 65-68.

P. Mayer, R. Skorupski, M. Smaga, D. Eifler, J. C. Aurich: Deformation induced surface hardening when turning metastable austenite AISI 347 with different cryogenic cooling strategies, Procedia CIRP - 6th CIRP Conference on High Performance Cutting 14 (2014) 101-106.

P. Mayer, B. Kirsch, J. C. Aurich: Investigations on cryogenic turning to achieve surface hardening of metastable austenitic steel AISI 347, in: M. Merklein, J. Franke, H. Hagenah (Hrsg.): WGP Congress 2014 - Progress in Production Engineering, 09-10 September 2014, Erlangen, Deutschland, 153-160.

I. Raid, J. Seewig, D. Frölich, B. Sauer, P. Mayer, F. Schneider, J. C. Aurich: Kinematische Simulation gedrehter Wellenlaufflächen, wt online 104 (2014) 279-287.

R. Schmitt, P. Mayer, B. Kirsch, J. Aurich, C. Kuhn, R. Müller, K. Bhattacharya: A Phase Field Approach for Martensitic Transformations and Plasticity, Proc. Appl. Math. Mech. 14 (2014) 383-384.

R. Skorupski, M. Smaga, D. Eifler, P. Mayer, J. C. Aurich: Low cycle fatigue behavior of AISI 347 with varied surface morphology, in: P. D. Portella (Hrsg.): 7th Int. Conference on Low Cycle Fatigue, Aachen (2013) 39-44, ISBN: 978-3-9814516-2-7.

R. Skorupski, M. Smaga, D. Eifler, P. Mayer, J. C. Aurich.: Phase transformation as a result of mechanical loading and turning of metastable austenitic steels, in: Wiley, J. & Sons (Hrsg.): TMS 2013 Annual Meeting Supplemental Proceedings, 3-7 März 2013, San Antonio, Texas, USA, 877-884. DOI: 10.1002/9781118663547.ch109.

b) Andere Veröffentlichungen

P. Mayer, B. Kirsch, J. C. Aurich: Randschichthärten bei der Edelstahlbearbeitung - Verformung beim Drehen gezielt nutzen, ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb (2014) 7/8 530-533.

c) Erteilte und angemeldete Patente

J. C. Aurich, S. Basten, H. Hasse, E. v. Harbou, B. Kirsch, P. Mayer, E. Ströfer: Verfahren zum Betrieb einer spanenden Werkzeugmaschine und Werkzeugmaschine für die spanende Bearbeitung von Werkstücken, Deutsches Patentamt DE102016215545 (2017).

Teilprojekt B03 (Antonyuk)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

S. Antonyuk, M. Bozoglu, S. Ripperger: Creating Surface Morphologies by Cold Spraying, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 125-146, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_6

T. Beck, M. Smaga, S. Antonyuk, D. Eifler, R. Müller, H. M. Urbassek, T. Zhu: Influence of Manufacturing and Load Conditions on the Phase Transformation and Fatigue of Austenitic Stainless Steels, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 257-288, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_11

S. Thielen, S. Antonyuk, J. C. Aurich, T. Beck, H. Hasse, M. Kopnarski, B. Magyar, B. Sauer, M. Smaga: Manufacturing-Morphology-Property Relationships for Rotating Shaft Sealing Systems, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 349-367, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_14

R. Ulber, S. Antonyuk, J. C. Aurich, T. Beck, M. Bozoglu, G. v. Freymann, S. Kieren-Ehses, C. Müller-Renno, K. Muffler, A. Schmeckebier, C. Schönecker, J. Seewig, M. Smaga, J. Stiefelmaier, D. Strieth, A. Zayed, C. Ziegler, S. Zimmermann: Manufacturing-Morphology-Property Relationships for Biofilms, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 411-442, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_17

O. Aleksieieva, L. Dereviankina, P. Breuninger, M. Bozoglu, P. Tretiakov, A. Toporov, S. Antonyuk: Simulation of Particle Interaction with Surface Microdefects during Cold Gas-Dynamic Spraying, Coatings 12 (2022) 1297.

F. Krull, J. Mathy, P. Breuninger, S. Antonyuk: Influence of the surface roughness on the collision behavior of fine particles in ambient fluids, Powder Technol. 392 (2021) 58-68.

S. Thielen, P. Breuninger, H. Hotz, C. Burkhart, T. Schollmayer, B. Sauer, S. Antonyuk, B. Kirsch, J. C. Aurich: Improving the tribological properties of radial shaft seal countersurfaces using experimental micro peening and classical shot peening processes, Tribol. Int. 155 (2021).

P. Breuninger, F. Krull, K. Huttenlochner, C. Müller-Reno, C. Ziegler, R. Merz, M. Kopnarski, S. Antonyuk: Microstructuring of steel surfaces via cold spraying with 316L particles for studying the particle-wall collision behavior, Surf. Coat. Technol. 379 (2019) 125054.

P. Breuninger, F. Krull, S. Buhl, A. Binder, R. Merz, M. Kopnarski, B. Sachweh, S. Antonyuk: Microstructuring of titanium surfaces with plasma-modified titanium particles by cold spraying, Particuology 44 (2019) 90-104.

P. Breuninger, D. Weis, I. Behrendt, P. Grohn, F. Krull, S. Antonyuk: CFD–DEM simulation of fine particles in a spouted bed apparatus with a Wurster tube, Particuology 42 (2019) 114-125.

T. Dillenburger, A. Hellmann, L. Hillemann, M. Stintz, S. Ripperger, S. Antonyuk: Aerosol generation of non-spherical particles by desublimation of copper phthalocyanine, Chemical Engineering & Technology 42 (2018) 599-606.

F. Krull, R. Hesse, P. Breuninger, S. Antonyuk: Impact behaviour of microparticles with microstructured surfaces: Experimental study and DEM simulation, Chem. Eng. Res. Des. 135 (2018) 175-184.

S. Buhl, P. Breuninger, S. Antonyuk: Optimization of a laval nozzle for energy-efficient cold spraying of microparticles, Mater. Manuf. Processes 33 (2018) 115-122.

C. Schlegel, J. Chodorski, M. Huster, N. Davoudi, K. Huttenlochner, M. Bohley, I. Reichenbach, S. Buhl, P. Breuninger, C. Müller-Renno, C. Ziegler, J. Aurich, S. Antonyuk, R. Ulber: Analyzing the influence of microstructured surfaces on the lactic acid production of Lactobacillus delbrueckii lactis in a flow-through cell system, Eng. Life Sci. 17 (2017) 865-873.

F. Krull, P. Breuninger, S. Antonyuk: Dynamic interactions of polystyrene particles with microstructured surface manufactured by cold spray, Eur. Phys. J. WOC 140 (2017) 13011.

K. Schmidt, S. Buhl, N. Davoudi, C. Godard, R. Merz, I. Raid, E. Kerscher, M. Kopnarski, C. Müller-Renno, S. Ripperger, J. Seewig, C. Ziegler, S. Antonyuk: Ti surface modification by cold spraying with TiO2 microparticles, Surf. Coat. Technol. 309 (2017) 749-758.

S. Buhl, K. Schmidt, D. Sappok, R. Merz, C. Godard, E. Kerscher, M. Kopnarski, B. Sauer, S. Antonyuk, S. Ripperger: Surface structuring of case hardened chain pins by cold-sprayed microparticles to modify friction and wear properties, Particuology 21 (2015) 32-40.

C. Müller-Renno, S. Buhl, N. Davoudi, J. C. Aurich, S. Ripperger, R. Ulber, K. Muffler, Ch. Ziegler: Novel Materials for Biofilm Reactors and their Characterization, Advances in Biochemical Engineering/Biotechnology 146 (2014) 207-233

K. Schmidt, S. Buhl, D. Hund, S. Ripperger: Kaltgasspritzen zur Mikrostrukturierung von Bauteiloberflächen, Chem. Ing. Tech. 87 (2015) 111-118.

b) Andere Veröffentlichungen

P. Breuninger, S. Buhl, A. Binder, R. Merz, M. Kopnarski, B. Sachweh, S. Antonyuk: Microstructured component surfaces by cold spraying with plasma- modified particles, Formula IX (2017).

P. Breuninger, F. Krull, S. Antonyuk: Manufacturing and characterization of particle structured 1.4571 surfaces with a cold spray method, Surface Modification Technology Conference (SMT31) (2017).

S. Buhl, P. Breuninger, S. Antonyuk: Optimization of a Laval Nozzle For Energy Efficient Cold Spraying of Microparticles, Surface Modification Technology Conference (SMT30) (2016).

S. Buhl, K. Schmidt, S. Ripperger, S. Antonyuk: Surface Microstructuring by a Cold Spray Technique to Modify Surface Properties, International Congress on Particle Technology (2016) 259-260.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B04 (Kerscher)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

E. Kerscher, S. Diederichs, N. Ghavidel, A. Keksel, C. Kuhn, R. Müller, J. Seewig, F. J. P. Sousa: Interrelationship of Manufacturing, Surface Morphology, and Properties of Titanium, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 231-255, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_10

M. Kopnarski, T. Beck, S. Diederichs, E. Kerscher, J. Seewig, M. Smaga: Geometrical, Microstructural, and Chemical Characterization, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 9-39, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_2

S. Kieren-Ehses, L. Böhme, L. Morales-Rivas, J. Lösch, B. Kirsch, E. Kerscher, M. Kopnarski, J. C. Aurich: The influence of the crystallographic orientation when micro machining commercially pure titanium: A size effect, Precis. Eng. 72 (2021) 158-171.

L. Morales-Rivas, L. Böhme, E. Kerscher: Orientation mapping of cp-Ti by reflected polarized light microscopy, MATEC Web Conf. 321 (2020) 11096.

L. Böhme, F. Ströer, A. Keksel, J. Seewig, E. Kerscher: Forecast of the fatigue crack initiation site of commercially pure Titanium miniature specimens with local surface topography data, MATEC Web Conf. 321 (2020) 11008.

L. Böhme, A. Keksel, F. Ströer, M. Bohley, S. Kieren-Ehses, B. Kirsch, J. C. Aurich, J. Seewig, E. Kerscher: Micro hardness determination on a rough surface by using combined indentation and topography measurements, Surf. Topogr. Metrol. Prop. 7 (2019) 045021.

R. Bischof, L. Böhme, C. Kuhn, R. Müller, E. Kerscher: Deformation behaviour of small scale cp-titanium specimen with large grains, Proc. Appl. Math. Mech. 18 (2018) 1-2.

L. Böhme, L. Morales-Rivas, S. Diederichs, E. Kerscher: Crystal c-axis mapping of hcp metals by conventional reflected polarized light microscopy: Application to untextured and textured cp-Titanium, Mater. Charact. 145 (2018) 573-581.

L. Morales-Rivas, S. Diederichs, L. Böhme, E. Gordo, A. Hebestreit, E. Kerscher: Method for the Detection of Grain Boundaries in α Ti-Based Alloys by Means of Polarized Light Microscopy and Image Processing in MATLAB, Pract. Metallogr. 55 (2018) 678-692.

M. Bohley, I. G. Reichenbach, S. Kieren-Ehses, L. Heberger, P. A. Arrabiyeh, R. Merz, L. Böhme, J. Hering, B. Kirsch, M. Kopnarski, E. Kerscher, G. von Freymann, J. C. Aurich: Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings, J. Manuf. Mater. Process. 2 (2018) 22.

C. Godard, U. Klement, E. Kerscher: Electron backscatter diffraction-analysis of deformed micro-milled commercially pure-titanium specimens at different strain values, Int. J. Mater. Res. 108 (2017) 798-807.

K. Schmidt, S. Buhl, N. Davoudi, C. Godard, R. Merz, I. Raid, E. Kerscher, M. Kopnarski, C. Müller-Renno, S. Ripperger, J. Seewig, C. Ziegler, S. Antonyuk: Ti surface modification by cold spraying with TiO2 microparticles, Surf. Coat. Technol. 309 (2017) 749-758.

A. Azhari, C. Schindler, C. Godard, J. Gibmeier, E. Kerscher: Effect of multiple passes treatment in waterjet peening on fatigue performance, Appl. Surf. Sci. 388 (2016) 468-474.

S. Buhl, K. Schmidt, D. Sappok, R. Merz, C. Godard, E. Kerscher, M. Kopnarski, B. Sauer, S. Antonyuk, S. Ripperger: Surface structuring of case hardened chain pins by cold-sprayed microparticles to modify friction and wear properties, Particuology 21 (2015) 32-40.

C. Godard, A. Klingler, T. Junker, E. Kerscher: The Applicability of Nanoindentation for the Examination of Microstructured Areas in CP Titanium Samples, Pract. Metallogr. 52 (2015) 314-322.

C. Godard, M. Bohley, J. C. Aurich, E. Kerscher: Deformation behaviour of micro-milled cp-titanium specimens under tensile loading, Int. J. Mater. Res. 106 (2015) 572-579.

A. Azhari, C. Schindler, J. Nkoumbou, E. Kerscher: Surface Erosion of Carbon Steel 1045 During Waterjet Peening, J. Mater. Eng. Perform. 23 (2014) 1870-1880.

A. Azhari, C. Schindler, K. Hilbert, C. Godard, E. Kerscher: Influence of waterjet peening and smoothing on the material surface and properties of stainless steel 304, Surf. Coat Technol. 258 (2014) 1176-1182.

C. Godard, E. Kerscher: Characterization of the Fracture Morphology of Commercially Pure (cp)-Titanium Micro Specimens Tested by Tension-Compression Fatigue Tests, Proc. Mater. Sci. 3 (2014) 440-446.

E. Kerscher: Influence of microstructure and micro notches on the fatigue limit, Procedia Eng. 74 (2014) 210-217.

C. Kühn, E. Kerscher: Consequences of Micro-Milled and Laser Structured Surfaces of cp-Titanium on Tension-Compression Fatigue Behaviour, Materials Science Forum Vol. 765, Trans Tech Publications, Switzerland (2013) 653-657.

C. Ruffing, P. Grad, M. Klassen, R. Müller, E. Kerscher: Experimental and numerical investigation of the microstructural influence on the deformation behavior of notched cp-titanium specimens, Int. J. Mater. Res. 104 (2012) 535-541.

b) Andere Veröffentlichungen

L. Böhme, A. Hebestreit, S. Kieren-Ehses, M. Bohley, B. Kirsch, J. C. Aurich, E. Kerscher: Präparation dünner Stege zur Bestimmung der kristallographischen Orientierung und deren Einfluss bei der Zerspanung von Reintitan auf der Mikroskala, in: A. Neidel (eds.): Fortschritte in der Metallographie, pp. 143-148, Werkstoff-Informationsgesellschaft (2019). ISBN/ISSN: 978-3-88355-415-0.

L. Morales-Rivas, S. Diederichs, L. Böhme, E. Gordo, A. Hebestreit, E. Kerscher: Methode zur Erkennung von Korngrenzen in alpha-Ti-Basislegierungen mittels polarisierter Lichtmikroskopie und Bildverarbeitung in Matlab. In: Fortschritte in der Metallographie, Fortschritte in der Metallographie (Sonderbände der Praktischen Metallographie zur 51. Metallographie-Tagung), Aalen (2017) 285-290. ISBN/ISSN: 978-3-88355-415-0.

L. Böhme, C. Godard, E. Kerscher: Approaches to Predict the Fatigue Limit of Micro Notched Ti Miniature Specimens, Proceedings of the International Symposium of Notch Fracture, Santander, Spain (2017) 216-221.

L. Böhme, C. Godard, E. Kerscher: Influence of engineered surfaces and microstructure on the fatigue limit of titanium, 30th International Conference on Surface Modification Technologies (2016).

C. Godard, A. Klingler, T. Junker, E. Kerscher: Anwendbarkeit der Nanoindentation zur Untersuchung mikrostrukturierter Bereiche in cp-Titan-Proben, In: S. Mayer, M. Panzenbröck, H. Clemens: Fortschritte in der Metallographie, Sonderbände der Praktischen Metallographie, Hrsg.: F. Mücklich und G. Petzow; 46, pp. 119-124, 2014.

C. Kühn, C. Ruffing, T. Junker, E. Kerscher: Untersuchung des Gefügeeinflusses auf das plastische Verformungsverhalten gekerbter cp-Titan Proben, In: O. Keßler, M. Rettenmayr: Fortschritte in der Metallographie, Sonderbände der Praktischen Metallographie, Hrsg.: G. Petzow, 44, pp. 149-154, 2012.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B05 (Beck, Smaga)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

T. Beck, M. Smaga, S. Antonyuk, D. Eifler, R. Müller, H. M. Urbassek, T. Zhu: Influence of Manufacturing and Load Conditions on the Phase Transformation and Fatigue of Austenitic Stainless Steels, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 257-288, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_11

M. Kopnarski, T. Beck, S. Diederichs, E. Kerscher, J. Seewig, M. Smaga: Geometrical, Microstructural, and Chemical Characterization, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 9-39, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_2

H. K. Thammineni, T. Zhu, M. Smaga, T. Beck, R. Müller: Numerical modelling of stress‐strain response and deformation‐induced martensite in metastable austenitic stainless steels under monotonic tensile loading, Proc. Appl. Math. Mech. 22 (2023).

M. Smaga, A. Boemke, D. Eifler, T. Beck: Very High Cycle Fatigue Behavior of Austenitic Stainless Steels with Different Surface Morphologies, Metals 12 (2022).

H. K. Thammineni, T. Zhu, M. Smaga, T. Beck, R. Müller: Constitutive modelling of the deformation‐induced martensite transformation observed in metastable austenitic CrNi steels, Proc. Appl. Math. Mech. 21 (2021).

H. Hotz, B. Kirsch, T. Zhu, M. Smaga, T. Beck, J. C. Aurich: Surface layer hardening of metastable austenitic steel – Comparison of shot peening and cryogenic turning, Journal of Materials Research and Technology 9 (2020) 16410-16422.

H. Hotz, M. Smaga, B. Kirsch, T. Zhu, T. Beck, J. C. Aurich: Characterization of the subsurface properties of metastable austenitic stainless steel AISI 347 manufactured in a two-step turning process, Procedia CIRP 87 (2020) 35-40.

M. Smaga, A. Boemke, T. Daniel, R. Skorupski, A. Sorich, T. Beck: Fatigue Behavior of Metastable Austenitic Stainless Steels in LCF, HCF and VHCF Regimes at Ambient and Elevated Temperatures, Metals 9 (2019).

J. Meiser, I. A. Alhafez, T. Beck, M. Smaga, R. Müller, H. M. Urbassek: Nanoindentation into a metastable austenite triggers the martensitic phase transformation—An atomistic study, AIP Adv. 9 (2019) 015228.

B. Kirsch, H. Hotz, R. Müller, S. Becker, A. Boemke, M. Smaga, T. Beck, J. C. Aurich: Generation of deformation-induced martensite when cryogenic turning various batches of the metastable austenitic steel AISI 347, Production Engineering (2019) 1-8.

P. Mayer, B. Kirsch, C. Müller, H. Hotz, R. Müller, S. Becker, E. v. Harbou, R. Skorupski, A. Boemke, M. Smaga, D. Eifler, T. Beck, J. C. Aurich: Deformation induced hardening when cryogenic turning, CIRP J. Manuf. Sci. Technol. 23 (2018) 6-19.

T. Daniel, A. Boemke, M. Smaga, T. Beck: Investigations of Very High Cycle Fatigue Behavior of Metastable Austenitic Steels Using Servohydraulic and Ultrasonic Testing Systems, ASME 2018 Pressure Vessels and Piping Conference (2018) V01BT01A071. DOI: 10.1115/PVP2018-84639.

M. Smaga, A. Boemke, T. Daniel, M. W. Klein: Metastability and fatigue behavior of austenitic stainless steels, MATEC Web Conf. 165 (2018). DOI: 10.1051/matecconf/201816504010.

A. Boemke, M. Smaga, T. Beck: Influence of surface morphology on the very high cycle fatigue behavior of metastable and stable austenitic Cr-Ni steels, MATEC Web Conf. 165 (2018). DOI: 10.1051/matecconf/201816520008.

S. Schmidt, M. W. Klein, A. Boemke, M. Smaga, T. Beck, R. Müller: Investigation of austenitic TRIP steels by means of a phase field model, Proc. Appl. Math. Mech. 18 (2018) e201800369.

M. W. Klein, R. Skorupski, M. Smaga, T. Beck: Phase Transformation and Deformation Behavior of Steels with Different Content of Metastable Austenite, Engng. Trans. 65 (2017) 69-75.

H. Hotz, B. Kirsch, P. Mayer, S. Becker, E. v. Harbou, A. Boemke, R. Skorupski, M. Smaga, R. Müller, T. Beck, J. C. Aurich: Surface integrity of cryogenic turned austenitic stainless steels AISI 347 and AISI 904L, 7. WGP-Jahreskongress, Aachen (2017) 473-480. ISBN/ISSN: 978-3-86359-555-5.

J. Man, M. Smaga, I. Kuběna, D. Eifler, J. Polák: Effect of metallurgical variables on the austenite stability in fatigued AISI 304 type steels, Eng. Fract. Mech. 185 (2017) 139-159.

M. Smaga, A. Sorich, D. Eifler, T. Beck: Very High Cycle Fatigue behavior of metastable austenitic steel X6CrNiNb1810 at 300°C, Proceedings VHCF7 (2017) 249-254. ISBN/ISSN: 978-3-00-056960-9.

M. Smaga, R. Skorupski, D. Eifler, T. Beck: Microstructural characterization of cyclic deformation behavior of metastable austenitic stainless steel AISI 347 with different surface morphology, J. Mater. Res. 32 (2017) 4452-4460.

M. Smaga, R. Skorupski, P. Mayer, B. Kirsch, J. C. Aurich, I. Raid, J. Seewig, J. Man, D. Eifler, T. Beck: Influence of surface morphology on fatigue behavior of metastable austenitic stainless steel AISI 347 at ambient temperature and 300°C, Procedia Struct. Integrity 5 (2017) 989-996.

A. Boemke, M. Smaga, T. Beck: Quasistatisches und zyklisches Verformungsverhalten von metastabilen und stabilen austenitischen Cr-Ni-Stählen, Fortschritte in der Werkstoffprüfung für Forschung und Praxis (2016) 83-88.

D. Eifler, M. Smaga, M. Klein: Fatigue monitoring of metals based on mechanical hysteresis, electromagnetic ultrasonic, electrical resistance and temperature measurements, Mech. Eng. J. 3 (2016) 16-00303.

D. Frölich, B. Magyar, B. Sauer, P. Mayer, B. Kirsch, J. C. Aurich, R. Skorupski, M. Smaga, T. Beck, D. Eifler: Investigation of wear resistance of dry and cryogenic turned metastable austenitic steel shafts and dry turned and ground carburized steel shafts in the radial shaft seal ring system, Wear 328-329 (2015) 123-131.

A. Sorich, M. Smaga, D. Eifler: Fatigue Monitoring of Austenitic Steels with Electromagnetic Acoustic Transducers (EMATs), Mat. Per. and Char. 4 (2015) 263-274.

J. C. Aurich, B. Kirsch, P. Mayer, D. Eifler, M. Smaga, R. Skorupski: Characterization of deformation induced surface hardening during cryogenic turning of AISI 347, CIRP Ann. Manuf. Technol. 63 (2014) 65-68.

F. Hahnenberger, M. Smaga, D. Eifler: Microstructural investigation of the fatigue behavior and phase transformation in metastable austenitic steels at ambient and lower temperatures, Int. J. Fatigue 69 (2014) 36-48.

P. Mayer, R. Skorupski, M. Smaga, D. Eifler, J. C. Aurich: Deformation induced surface hardening when turning metastable austenite AISI 347 with different cryogenic cooling strategies, in: 6th CIRP International Conference on High Performance Cutting HPC, Procedia CIRP 14 (2014) 101-106.

R. Schmitt, C. Kuhn, R. Skorupski, M. Smaga, D. Eifler, R. Müller: A combined phase filed approach for martensitic transformations and damage, Arch. Appl. Mech. 85 (2014) 1459-1468.

R. Skorupski, M. Smaga, D. Eifler: Influence of surface morphology on the fatigue behavior of metastable austenitic steel, Adv. Mater. Res. 891-892 (2014) 464-469.

A. Sorich, M. Smaga, D. Eifler: Influence of cyclic deformation induced phase transformation on the fatigue behavior of the austenitic steel X6CrNiNb1810, Adv. Mat. Res. 891-892 (2014) 1231-1236.

F. Hahnenberger, R. Skorupski, M. Smaga, D. Eifler: Influence of mechanical loading, temperature and chemical compositions on the deformation induced martensite formation in metastable austenitic steels, Mater. Sci. Forum 738-739 (2013) 217-221.

R. Schmitt, R. Müller, R. Skorupski, M. Smaga, D. Eifler: A Phase Field Approach for Martensitic Transformations in Elastoplastic Materials, Appl. Math. Mech. 13 (2013) 213-214.

R. Skorupski, M. Smaga, D. Eifler, P. Mayer, J. C. Aurich: Phase transformation as a result of mechanical loading and turning of metastable austenitic steels, in: TMS 2013 Conference Proceedings (2013) 877-884. DOI: 10.1002/9781118663547.ch109.

R. Skorupski, M. Smaga, D. Eifler, P. Mayer, J. C. Aurich: Low cycle fatigue behaviour of AISI 347 with varied surface morphology, 7th International Conference on Low Cycle Fatigue (2013) 39-44. ISBN: 978-3-9814516-2-7.

R. Skorupski, M. Smaga, D. Eifler, R. Schmitt, R. Müller: Influence of morphology of deformation induced α´-martensite on stress-strain response in a two phase austenitic-martensitic-steel, Key Eng. Mater. 592-593 (2014) 582-585.

A. Sorich, M. Smaga, D. Eifler: In-situ monitoring of fatigue of metastable austenitic steels with electromagnetic acoustic transducers, EMATs, in: 13th International Conference on Fracture, 16. - 21. Juni 2013, Beijing, China, Conference Proceeding (2013).

F. Hahnenberger, M. Smaga, D. Eifler: Influence of γ-α’-phase transformation in metastable austenitic steels on the mechanical behavior during tensile and fatigue loading at ambient and lower temperatures, Adv. Eng. Mater. 14 (2012) 853-858.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B06 (Ziegler, Müller-Renno)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

R. Ulber, S. Antonyuk, J. C. Aurich, T. Beck, M. Bozoglu, G. v. Freymann, S. Kieren-Ehses, C. Müller-Renno, K. Muffler, A. Schmeckebier, C. Schönecker, J. Seewig, M. Smaga, J. Stiefelmaier, D. Strieth, A. Zayed, C. Ziegler, S. Zimmermann: Manufacturing-Morphology-Property Relationships for Biofilms, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 411-442, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_17

K. Groß, M. Eifler, K. Klauer, K. Huttenlochner, B. Kirsch, C. Ziegler, J. C. Aurich, J. Seewig: Determination of the surface topography of ball end micro milled material measures, Engineering Science and Technology (2020).

L. Hofherr, C. Müller-Renno, C. Ziegler: FluidFM as a tool to study adhesion forces of bacteria - Optimization of parameters and comparison to conventional bacterial probe Scanning Force Spectroscopy, PLOS ONE 15 (2020) e0227395.

M. Engel, A. Gemünde, D. Holtmann, C. Müller-Renno, C. Ziegler, N. Tippkötter, R. Ulber: Clostridium Acetobutylicum’s Connecting World: Cell Appendage Formation in Bioelectrochemical Systems, ChemElectroChem 7 (2020) 414-420.

D. Kleine, J. Chodorski, S. Mitra, C. Schlegel, K. Huttenlochner, C. Müller-Renno, J. Mukherjee, C. Ziegler, R. Ulber: Monitoring of biofilms grown on differentially structured metallic surfaces using confocal laser scanning microscopy, Eng. Life Sci. 19 (2019) 513-521.

P. Breuninger, F. Krull, K. Huttenlochner, C. Müller-Reno, C. Ziegler, R. Merz, M. Kopnarski, S. Antonyuk: Microstructuring of steel surfaces via cold spraying with 316L particles for studying the particle-wall collision behavior, Surf. Coat. Technol. 379 (2019) 125054.

K. Huttenlochner, N. Davoudi, C. Schlegel, M. Bohley, C. Müller-Renno, J. C. Aurich, R. Ulber, C. Ziegler: Paracoccus seriniphilus adhered on surfaces: Resistance of a seawater bacterium against shear forces under the influence of roughness, surface energy, and zeta potential of the surfaces, Biointerphases 13 (2018) 051003.

L. Hofherr, J. Chodorski, C. Müller-Renno, R. Ulber, C. Ziegler: Comparison of Versatile Immobilization Methods for Gram-Positive Bacteria on a Silicon Cantilever, Phys. Status Solidi A 215 (2018) 1700846.

J. Hering, M. Eifler, L. Hofherr, C. Ziegler, J. Seewig, G. von Freymann: Two-photon laser lithography in optical metrology, Proc. SPIE Int. Soc. Opt. Eng., San Francisco, USA 10544 (2018) 1054412. DOI: 10.1117/12.2289900.

N. Davoudi, K. Huttenlochner, J. Chodorski, C. Schlegel, M. Bohley, C. Müller-Renno, J. C. Aurich, R. Ulber, C. Ziegler: Adhesion forces of the sea-water bacterium Paracoccus seriniphilus on titanium: Influence of microstructures and environmental conditions, Biointerphases 12 (2017) 05G606.

C. Schlegel, J. Chodorski, M. Huster, N. Davoudi, K. Huttenlochner, M. Bohley, I. Reichenbach, S. Buhl, P. Breuninger, C. Müller-Renno, C. Ziegler, J. Aurich, S. Antonyuk, R. Ulber: Analyzing the influence of microstructured surfaces on the lactic acid production of Lactobacillus delbrueckii lactis in a flow-through cell system, Eng. Life Sci. 17 (2017) 865-873.

K. Huttenlochner, C. Müller-Renno, C. Ziegler, R. Merz, B. Merz, M. Kopnarski, J. Chodorski, C. Schlegel, R. Ulber: Removing biofilms from stainless steel without changing surface properties relevant for bacterial attachment, Biointerphases 12 (2017) 02C404.

K. Schmidt, S. Buhl, N. Davoudi, C. Godard, R. Merz, I. Raid, E. Kerscher, M. Kopnarski, C. Müller-Renno, S. Ripperger, J. Seewig, C. Ziegler, S. Antonyuk: Ti surface modification by cold spraying with TiO2 microparticles, Surf. Coat. Technol. 309 (2017) 749-758.

C. Rösch, F. Kratz, T. Hering, S. Trautmann, N. Umanskaya, N. Tippkötter, C. Müller-Renno, R. Ulber, M. Hannig, C. Ziegler: Albumin-lysozyme interactions: Cooperative adsorption on titanium and enzymatic activity, Colloids Surf. B. Biointerfaces 149 (2017) 115-121.

F. Kratz, S. Trautmann, N. Umanskaya, C. Müller-Renno, M. Hannig, C. Ziegler: Investigation of loosely and firmly bound albumin and lysozyme layers on dental materials, Phys. Status Solidi A 213 (2016) 1486-1493.

M. Huster, C. Müller-Renno, C. Ziegler, C. Schlegel, R. Ulber, K. Muffler: Chloroperoxidase production by Caldariomyces fumago biofilms, Eng. Life Sci. 16 (2016) 88-92.

C. Mücksch, C. Rösch, C. Müller-Renno, C. Ziegler, H. M. Urbassek: Consequences of Hydrocarbon Contamination for Wettability and Protein Adsorption on Graphite Surfaces, J. Phys. Chem. C 119 (2015) 12496-12501.

F. Kratz, S. Grass, N. Umanskaya, C. Scheibe, C. Müller-Renno, N. Davoudi, M. Hannig, C. Ziegler: Cleaning of biomaterial surfaces: Protein removal by different solvents, Colloids Surf. B. Biointerfaces 128 (2015) 28-35.

M. Fingerle, O. Köhler, C. Rösch, F. Kratz, C. Scheibe, N. Davoudi, C. Müller-Renno, C. Ziegler, M. Huster, C. Schlegel, R. Ulber, M. Bohley, J. C. Aurich: Cleaning of titanium substrates after application in a bioreactor, Biointerphases 10 (2015) 019007.

N. Davoudi, C. Müller-Renno, C. Ziegler, I. Raid, J. Seewig, C. Schlegel, K. Muffler, R. Ulber: Nanomechanical properties of the sea-water bacterium Paracoccus seriniphilus—A scanning force microscopy approach, Biointerphases 10 (2015) 019004.

C. Mücksch, C. Rösch, C. Müller−Renno, C. Ziegler, H. Urbassek: Consequences of Hydrocarbon Contamination for Wettability and Protein Adsorption on Graphite Surfaces. J. Phys. Chem. C 119 (2015) 12496–12501.

M. Bohley, R. Merz, C. Müller-Renno, I. G. Reichenbach, N. Davoudi, C. Ziegler, M. Kopnarski, J. C. Aurich: Werkzeug-Werkstück Interaktion beim Mikrofräsen. Charakterisierung des Wirkpaarverhaltens anhand von Spanbildungs- und Oberflächenuntersuchungen, wt online 9 (2014).

F. Kratz, N. Davoudi, C. Müller-Renno, S. Grass, N. Umanskaya, M. Hannig, C. Ziegler: Influence of sodium fluoride on the BSA adsorption on titanium, Biomed. Tech. 50 (2014) S81-S84, DOI: 10.1515/bmt-2014-5000.

C. Müller-Renno, C. Ziegler: The scanning force microscope in bacterial cell investigations, Phys Status Solidi A210 5 (2013) 846-852.

C. Müller-Renno, S. Buhl, N. Davoudi, J. C. Aurich, S. Ripperger, R. Ulber, K. Muffler, C. Ziegler: Novel Materials for Biofilm Reactors and their Characterization, Adv. Biochem. Eng. Biotechnol. 146 (2014) 207-233.

b) Andere Veröffentlichungen

K. Muffler, C. Schlegel, C. Ziegler, J. C. Aurich, R. Ulber: Produktive Biofilme - Wechselwirkung zwischen Oberfllächenmorphologie & Stoffwechsel, Biospektrum 2 (2013) 216-217.

C. Schlegel, N. Wesuls, A. Pasteur, C. Müller, I. G. Reichenbach, C. Ziegler, J. C. Aurich, K. Muffler, R. Ulber: Charakterisierung produktiver Biofilme auf mikrostrukturierten Bauteiloberflächen, Technische Systeme für die Lebenswissenschaften, 16. Heiligenstädter Kolloquium, Heiligenstadt 2012 (Conference Proceedings) 63-67.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B07 (Seewig)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

J. Seewig, G. v. Freymann, J. C. Aurich, M. Eifler, J. Hering-Stratemeier, K. Klauer-Dobrowolski: Manufacturing of Areal Material Measures, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 315-347, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_13

M. Kopnarski, T. Beck, S. Diederichs, E. Kerscher, J. Seewig, M. Smaga: Geometrical, Microstructural, and Chemical Characterization, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 9-39, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_2

E. Kerscher, S. Diederichs, N. Ghavidel, A. Keksel, C. Kuhn, R. Müller, J. Seewig, F. J. P. Sousa: Interrelationship of Manufacturing, Surface Morphology, and Properties of Titanium, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 231-255, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_10

K. Gutzeit, G. Bulun, G. Stelzer, B. Kirsch, J. Seewig, J. C. Aurich: Sub-zero milling of Ti-6Al-4V—impact of the cutting parameters on the resulting forces, tool wear, and surface quality, Int. J. Adv. Manuf. Technol. 126 (2023) 3367-3381.

K. Gutzeit, G. Bulun, G. Stelzer, B. Kirsch, J. Seewig, C. J. Aurich: Investigation of the surface integrity when cryogenic milling of Ti-6Al-4V using a sub-zero metalworking fluid, Procedia CIRP 108 (2022) 25-30.

S. Schmidt, M. Eifler, J. C. Issel, K. M. de Payrebrune, F. Ströer, A. Karatas, J. Seewig: Parameter Identification of an Abrasive Manufacturing Process With Machine Learning of Measured Surface Topography Information, J. Comput. Inf. Sci. Eng. 22 (2022) 041010-1-04101015.

G. Bulun, M. Eifler, J. Hering, G. von Freymann, J. Seewig: Performance specification of areal surface texture instruments exemplified by a self-built WLI, Proc. SPIE Optical Engineering + Applications 11490 (2020) 114900H. DOI: 10.1117/12.2567666.

L. Böhme, F. Ströer, A. Keksel, J. Seewig, E. Kerscher: Forecast of the fatigue crack initiation site of commercially pure Titanium miniature specimens with local surface topography data, MATEC Web Conf. 321 (2020) 11008.

M. Eifler, J. Hering, J. Seewig, R. K. Leach, G. von Freymann, X. Hu, G. Dai: Comparison of material measures for areal surface topography measuring instrument calibration, Surf. Topogr. Metrol. Prop. 8 (2020) 025019.

L. Böhme, A. Keksel, F. Ströer, M. Bohley, S. Kieren-Ehses, B. Kirsch, J. C. Aurich, J. Seewig, E. Kerscher: Micro hardness determination on a rough surface by using combined indentation and topography measurements, Surf. Topogr. Metrol. Prop. 7 (2019) 045021.

A. Keksel, F. Ströer, J. Seewig: Bayesian approach for circle fitting including prior knowledge, Surf. Topogr. Metrol. Prop. 6 (2018) 035002.

F. Ströer, K. Trinkaus, I. Raid, J. Seewig: System identification and control parameter optimization for a stylus profiler with exchangeable cantilevers, Eng. Sci. Technol. 21 (2018) 117-121.

M. Eifler, F. Ströer, S. Rief, J. Seewig: Model Selection and Quality Estimation of Time Series Models for Artificial Technical Surface Generation, Technologies 6 (2018) 3.

F. Ströer, J. Hering, M. Eifler, I. Raid, G. von Freymann, J. Seewig: Ultrafast 3D high precision print of micro structures for optical instrument calibration procedures, Addit. Manufacturing 18 (2017) 22-30.

P. A. Arrabiyeh, M. Bohley, F. Ströer, B. Kirsch, J. Seewig, J. C. Aurich: Experimental Analysis for the Use of Sodium Dodecyl Sulfate as a Soluble Metal Cutting Fluid for Micromachining with Electroless-Plated Micropencil Grinding Tools, Inventions 2 (2017) 29.

S. Rief, F. Ströer, S. Kieß, M. Eifler, J. Seewig: An Approach for the Simulation of Ground and Honed Technical Surfaces for Training Classifiers, Technologies 5 (2017) 66.

K. Schmidt, S. Buhl, N. Davoudi, C. Godard, R. Merz, I. Raid, E. Kerscher, M. Kopnarski, C. Müller-Renno, S. Ripperger, J. Seewig, C. Ziegler, S. Antonyuk: Ti surface modification by cold spraying with TiO2 microparticles, Surf. Coat. Technol. 309 (2017) 749-758.

M. Smaga, R. Skorupski, P. Mayer, B. Kirsch, J. C. Aurich, I. Raid, J. Seewig, J. Man, D. Eifler, T. Beck: Influence of surface morphology on fatigue behavior of metastable austenitic stainless steel AISI 347 at ambient temperature and 300°C, Procedia Struct. Integrity 5 (2017) 989-996.

M. Eifler, F. Schneider, J. Seewig, B. Kirsch, J. C. Aurich: Manufacturing of new roughness standards for the linearity of the vertical axis – Feasibility study and optimization, Eng. Sci. Technol. 19 (2016) 1993-2001.

J. Seewig, M. Eifler, F. Schneider, B. Kirsch, J. C. Aurich: A model-based approach for the calibration and traceability of the angle resolved scattering light sensor, Surf. Topogr. Metrol. Prop. 4 (2016) 024010.

J. Seewig, M. Eifler, F. Schneider, J. C. Aurich: Design and Verification of Geometric Roughness Standards by Reverse Engineering, Procedia CIRP 45 (2016) 259-262.

I. Raid, M. Eifler, T. Kusnezowa, J. Seewig: Calibration of Ellipso-Height-Topometry with nanoscale gratings of varying materials, Optik 126 (2015) 4591-4596.

M. Eifler, J. Seewig, J. Hering, G. von Freymann: Calibration of z-axis linearity for arbitrary optical topography measuring instruments, Proc. SPIE Int. Soc. Opt. Eng. 9525 (2015) 952510.

M. Eifler, F. Schneider, M. Bohley, J. C. Aurich, J. Seewig: Contamination of roughness artefacts - impacts on the measurement results, 15th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2015) 119-120. ISBN/ISSN: 978-0-9566790-7-9.

N. Davoudi, C. Müller-Renno, C. Ziegler, I. Raid, J. Seewig, C. Schlegel, K. Muffler, R. Ulber: Nanomechanical properties of the sea-water bacterium Paracoccus seriniphilus—A scanning force microscopy approach, Biointerphases 10 (2015) 019004.

P. Arnecke, J. Seewig: Characterisation of texture orientation on ground surfaces with high accuracy, 15th International Conference on Metrology and Properties of Engineering Surfaces (2015).

I. Raid, T. Kusnezowa, J. Seewig: Application of ordinary kriging for interpolation of micro-structured technical surfaces, Meas. Sci. Technol. 24 (2013) 095201.

I. Raid, J. Seewig, D. Frölich, B. Sauer, P. Mayer, F. Schneider, J. C. Aurich: Kinematische Simulation gedrehter Wellenlaufflächen - Funktionsorientierte Untersuchung des Einflusses der Prozessparameter auf Drallstrukturen, wt-online 104 (2014).

I. Raid, M. Eifler, J. Seewig: Ellipso-Height-Topometry: White light interferometry with local material recognition, 15th International Conference on Metrology and Properties of Engineering Surfaces (2015).

J. Seewig, T. Böttner, D. Broschart: Uncertainty of height information in coherence scanning interferometry, SPIE Optical Metrology 8080 (2011) 80820V-1-80820V-9.

J. Seewig, I. Raid, C. Wiehr, B. A. George: Robust evaluation of intensity curves measured by confocal microscopies, SPIE Optical Metrology 8788 (2013) 8788OT-1-8788OT13.

J. Seewig, M. Eifler, G. Wiora: Unambiguous evaluation of a chirp measurement standard, Surf. Topogr.: Metrol. Prop. 2 (2014) 045003.

F. J. P. Sousa, D. S. Hosse, I. G. Reichenbach, J. C. Aurich, J. Seewig: Influence of kinematics and abrasive configuration on the grinding process of glass, J. Mater. Process. Technol. 1 (2013) 728-739.

F. J. P. Sousa, J. Seewig, C. Chiamulera, O. E. Alarcon, W. L. Weingärtner: Evolution Of Wear On The Abrasive Tool During The Polishing Of Porcelain Tile Using Morphological Space, Adv. Mater. Res. 906 (2014) 293-302.

b) Andere Veröffentlichungen

G. Bulun, M. Lotz, A. Keksel, G. Stelzer, J. Seewig: Construction of a Time-Domain Full-Field OCT for non-contact volumetric layer thickness measurement, Optical Measurement Systems for Industrial Inspection XIII 12618 (2023) 205-212.

G. Bulun, M. Eifler, J. Hering, G. von Freymann, J. Seewig: Performance specification of areal surface texture instruments exemplified by a self-built WLI, Proc. SPIE Optical Engineering + Applications 11490 (2020) 114900H. DOI: 10.1117/12.2567666.

F. M. Torner, A. Karatas, M. Eifler, I. Raid, J. Seewig: Application of GPU-based, highly parallelized algorithms for the estimation of electromagnetic multi-layer interactions, Proc. SPIE Int. Soc. Opt. Eng. 10329 (2017) 1032922.

J. Seewig, M. Eifler: Calibration of areal surface topography measuring instruments, Proc. SPIE Int. Soc. Opt. Eng. 10449 (2017) 1044911.

F. Schneider, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich: Praxisnahe Kalibrierung von Messgeräten - Entwicklung und Fertigung von Kalibriernormalen auf Basis realer Bauteiloberflächen, VDI-Z Integrierte Produktion 157 (2015) 32-34.

F. Schneider, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich: Entwicklung und Fertigung von Geometrienormalen auf Basis realer Bauteiloberflächen, Unter Span 2 (2015) 23-24.

P. Arnecke, J. Seewig: A strategy for micro-twist characterization on the shaft in a rotary shaft sealing system, 18th International Sealing Conference, Stuttgart, 8.-9.10.2014. Fachverband Fluidtechnik im VDMA e.V., S. 653–666.

J. Seewig, M. Eifler: Nahe an der Anwendung – Geometrienormale zur Kalibrierung von Tastschnittgeräten. QZ - Qualität und Zuverlässigkeit (2015).

F. J. P. Sousa, J. Seewig, C. Chiamulera, O. E. Alarcon, W. L. Weingärtner: Characterization of the tool wear due to the polishing of ceramic tiles under ductile regime using morphological space, 21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais 09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil (2014) 1031-1038.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B08 (Kopnarski)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

M. Kopnarski, T. Beck, S. Diederichs, E. Kerscher, J. Seewig, M. Smaga: Geometrical, Microstructural, and Chemical Characterization, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 9-39, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_2

M. Smaga, T. Beck, M. Kopnarski, R. Merz, K. M. de Payrebrune, S. Wolke: Influence of Surface Morphology on Fatigue and Tribological Behavior of TRIP/TWIP Steels, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 289-312, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_12

D. Merker, D. Bertinetti, R. Merz, M. Kopnarski, F. W. Herberg, C. Popov: Enhanced protein immobilization efficacy by nanostructuring of ultrananocrystalline diamond surface, Diamond Relat. Mater. 136 (2023) 109898.

I. Alabd Alhafez, M. Kopnarski, H. M. Urbassek: Scratching a soft layer above a hard substrate, Philosophical Magazine (2023) 1-12.

I. Alabd Alhafez, M. Kopnarski, H. M. Urbassek: Multiple Scratching: An Atomistic Study, Tribol. Lett. 71 (2023).

M. Chijiiwa, N. Berger, M. Schäfer, R. Merz, M. Kopnarski, P. Mitschang, J. A. L’huillier: Multiple regression analysis of the chemical components effect on wettability at ps laser micro-structured surfaces on stainless steel 304, Appl. Surf. Sci. 607 (2023) 154852.

S. M. Losslein, R. Merz, D. W. Muller, M. Kopnarski, F. Mucklich: An in-depth evaluation of sample and measurement induced influences on static contact angle measurements, Sci Rep 12 (2022) 19389.

P. Stoyanov, R. Merz, M. Stricker, M. Kopnarski, M. Dienwiebel: Achieving Ultra-Low Friction with Diamond/Metal Systems in Extreme Environments, Materials 14 (2021) 3791.

L. Lin, S. Emrich, M. Kopnarski, A. K. Schlarb: Lubrication performance of a polyetheretherketone (PEEK) and polytetrafluoroethylene (PTFE) blend within a steel/steel tribosystem, Wear 484-485 (2021) 203997.

S. Kieren-Ehses, L. Böhme, L. Morales-Rivas, J. Lösch, B. Kirsch, E. Kerscher, M. Kopnarski, J. C. Aurich: The influence of the crystallographic orientation when micro machining commercially pure titanium: A size effect, Precis. Eng. 72 (2021) 158-171.

M. Heier, R. Merz, S. Becker, K. Langenbach, M. Kopnarski, H. Hasse: Experimental Study of the Influence of the Adsorbate Layer Composition on the Wetting of Different Substrates with Water, Adsorpt. Sci. Technol. 2021 (2021) 6663989.

S. Basten, B. Kirsch, R. Merz, M. Kopnarski, H. Hasse, C. J. Aurich: Adsorption and reaction layers when turning AISI 304 using various cooling strategies, Procedia CIRP 87 (2020) 125-130.

C.-J. Hsu, J. Barrirero, R. Merz, A. Stratmann, H. Aboulfadl, G. Jacobs, M. Kopnarski, F. Mücklich, C. Gachot: Revealing the interface nature of ZDDP tribofilm by X-ray photoelectron spectroscopy and atom probe tomography, Industrial Lubrication and Tribology 72 (2020) 923-930.

J. Heupel, M. Pallmann, J. Körber, R. Merz, M. Kopnarski, R. Stöhr, J. P. Reithmaier, D. Hunger, C. Popov: Fabrication and Characterization of Single-Crystal Diamond Membranes for Quantum Photonics with Tunable Microcavities, Micromachines 11 (2020) 1080.

C. Burkhart, S. Emrich, M. Kopnarski, B. Sauer: Excessive shaft wear due to radial shaft seals in lubricated environment. Part II: Measures against excessive shaft wear, Wear 462-463 (2020) 203483.

C. Burkhart, S. Emrich, M. Kopnarski, B. Sauer: Excessive shaft wear due to radial shaft seals in lubricated environment. Part I: Analysis and mechanisms, Wear 460-461 (2020) 203419.

A. Brodyanski, M. W. Klein, R. Merz, M. Smaga, T. Beck, M. Kopnarski: Microstructural changes caused by friction loading in high manganese TWIP steel and case-hardened 16MnCr5, Mater. Charact. 163 (2020) 110231.

P. Breuninger, F. Krull, K. Huttenlochner, C. Müller-Reno, C. Ziegler, R. Merz, M. Kopnarski, S. Antonyuk: Microstructuring of steel surfaces via cold spraying with 316L particles for studying the particle-wall collision behavior, Surf. Coat. Technol. 379 (2019) 125054.

P. Breuninger, F. Krull, S. Buhl, A. Binder, R. Merz, M. Kopnarski, B. Sachweh, S. Antonyuk: Microstructuring of titanium surfaces with plasma-modified titanium particles by cold spraying, Particuology 44 (2019) 90-104.

C. Schäfer, L. Reinert, T. MacLucas, P. Grützmacher, R. Merz, F. Mücklich, S. Suarez: Influence of Surface Design on the Solid Lubricity of Carbon Nanotubes-Coated Steel Surfaces, Tribol. Lett. 66 (2018) 89.

M. Bohley, I. G. Reichenbach, S. Kieren-Ehses, L. Heberger, P. A. Arrabiyeh, R. Merz, L. Böhme, J. Hering, B. Kirsch, M. Kopnarski, E. Kerscher, G. von Freymann, J. C. Aurich: Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings, J. Manuf. Mater. Process. 2 (2018) 22.

K. Huttenlochner, C. Müller-Renno, C. Ziegler, R. Merz, B. Merz, M. Kopnarski, J. Chodorski, C. Schlegel, R. Ulber: Removing biofilms from stainless steel without changing surface properties relevant for bacterial attachment, Biointerphases 12 (2017) 02C404.

K. Schmidt, S. Buhl, N. Davoudi, C. Godard, R. Merz, I. Raid, E. Kerscher, M. Kopnarski, C. Müller-Renno, S. Ripperger, J. Seewig, C. Ziegler, S. Antonyuk: Ti surface modification by cold spraying with TiO2 microparticles, Surf. Coat. Technol. 309 (2017) 749-758.

I. A. Alhafez, A. Brodyanski, M. Kopnarski, H. M. Urbassek: Influence of Tip Geometry on Nanoscratching, Tribol. Lett. 65 (2017) 26.

W. Kulisch, A. Voss, D. Merker, J. P. Reithmaier, R. Merz, M. Kopnarski, C. Popov: Plasma surface fluorination of ultrananocrystalline diamond films, Surf. Coat. Technol. 302 (2016) 448-453.

C. Petkov, P. M. Reintanz, W. Kulisch, A. K. Degenhardt, T. Weidner, J. E. Baio, R. Merz, M. Kopnarski, U. Siemeling, J. P. Reithmaier, C. Popov: Functionalization of nanocrystalline diamond films with phthalocyanines, Appl. Surf. Sci. 379 (2016) 415-423.

S. Becker, R. Merz, H. Hasse, M. Kopnarski: Solvent cleaning and wettability of technical steel and titanium surfaces, Adsorpt. Sci. Technol. 34 (2016) 261-274.

S. Buhl, K. Schmidt, D. Sappok, R. Merz, C. Godard, E. Kerscher, M. Kopnarski, B. Sauer, S. Antonyuk, S. Ripperger: Surface structuring of case hardened chain pins by cold-sprayed microparticles to modify friction and wear properties, Particuology 21 (2015) 32-40.

Y. Gao, A. Brodyanski, M. Kopnarski, H. M. Urbassek: Nanoscratching of iron: A molecular dynamics study of the influence of surface orientation and scratching direction, Comput. Mater. Sci. 103 (2015) 77-89.

T. Lohner, R. Merz, J. Mayer, K. Michaelis, M. Kopnarski, K. Stahl: On the effect of plastic deformation (PD) additives in lubricants, Tribol. Schmierungstech. 62 (2015) 13-24.

M. Bohley, R. Merz, C. Müller-Renno, I. G. Reichenbach, N. Davoudi, C. Ziegler, M. Kopnarski, J. C. Aurich: Charakterisierung des Wirkpaarverhaltens anhand von Spanbildungs- und Oberflächenuntersuchungen, wt-online 9 (2014) 586-591.

R. Merz, A. Brodyanski, M. Kopnarski: On the role of oxidation in tribological contacts under environmental conditions, Conference Papers in Science, Hindawi Publishing Corporation, London (2015). DOI: 10.1155/2015/515498.

P. Stoyanov, P. A. Romero, R. Merz, M. Kopnarski, M. Stricker, P. Stemmer, M. Dienwiebel, M. Moseler: Nanoscale sliding friction phenomena at the interface of diamond-like carbon and tungsten, Acta Mater. 67 (2014) 395-408.

P. Stoyanov, R. Merz, P. Romero, F. C. Wählisch, O. T. Abad, R. Gralla, P. Stemmer, M. Kopnarski, M. Moseler, R. Bennewitz, M. Dienwiebel: Surface Softening in Metal - Ceramic Sliding Contacts: An Experimental and Numerical Investigation, ACS Nano 9 (2015) 1478-1491.

M. Marquart, M. Wahl, S. Emrich, G. Zhang, B. Sauer, M. Kopnarski, B. Wetzel: Enhancing the lifetime of MoS2-lubricated ball bearings, Wear 303 (2013) 169-177.

b) Andere Veröffentlichungen

C. Burkhart, M. Heier, R. Merz, J. Lösch, C. Wagner, S. Thielen, B. Sauer, M. Kopnarski, H. Hasse: Einfluss des Schmierstoffs auf Verschleißverhalten und -Mechanismen im System Radialwellendichtring, 62. Tribologie-Fachtagung (GfT) (2021).

P. Breuninger, S. Buhl, A. Binder, R. Merz, M. Kopnarski, B. Sachweh, S. Antonyuk: Microstructured component surfaces by cold spraying with plasma- modified particles, Formula IX (2017).

D. Sappok, R. Merz, B. Sauer, M. Kopnarski: Surface Analysis of Chain Joint Components after Tribological Load and Usage of Anti-Wear Additives, Conf. Pap. Sci., Karlsruhe (2015) 12. DOI: 10.1155/2015/407048.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B09 (Aurich)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

J. C. Aurich, N. Altherr, S. Kieren-Ehses, B. Kirsch, T. Mayer: Creating Surface Morphologies by Micro Milling and Micro Grinding, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 67-95, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_4

M. Heintz, B. Kirsch, J. C. Aurich: Experimental investigations of modified base body geometries of micro pencil grinding tools applied in 16MnCr, Proceedings of the 21th euspen International Conference (2021) 192-132. ISBN: 978-0-9957751-9-0

D. Setti, P. A. Arrabiyeh, B. Kirsch, M. Heintz, J. C. Aurich: Analytical and experimental investi-gations on the mechanisms of surface generation in micro grinding, Int. J. Mach. Tools Manuf. 149 (2020) 103489. 10.1016/j.ijmachtools.2019.103489

M. Heintz, P. A. Arrabiyeh, B. Kirsch, J. C. Aurich: Herstellung von Schleifwerkzeugen für die Mikrobearbeitung mithilfe eines chemischen Nickel-Phosphor-Dispersions-Beschichtungsverfahrens, in: H.-W. Hoffmeister and B. Denkena (eds.): Jahrbuch Schleifen, Honen, Läppen und Polieren, pp. 16-25, Vulkan-Verlag GmbH (2020). ISBN/ISSN: 978-3-8027-3133-4.

T. Mayer, S. Kieren-Ehses, M. Heintz, B. Kirsch, J. C. Aurich: Manufacture of novel all‐ceramic micro end mills, 20th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) Geneva (2020) 113-114.

P. A. Arrabiyeh, M. Heintz, S. Kieren-Ehses, M. Bohley, B. Kirsch, J. C. Aurich: Submerged micro grinding: a metalworking fluid application study, Int. J. Adv. Manuf. Technol. 107 (2020) 3807-3815.

M. Heintz, T. Mayer, B. Kirsch, J. C. Aurich: Tool/workpiece contact detection via acoustic emission in micro grinding, 20th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) Geneva (2020) 587-588.

P. A. Arrabiyeh, M. Heintz, B. Kirsch, J. C. Aurich: Custom made electroless plated dicing blades for micro machining operations, 19th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2019) 380-383.

P. A. Arrabiyeh, D. Setti, S. Basten, B. Kirsch, J. C. Aurich: Micro grinding 16MnCr5 hardened steel using micro pencil grinding tools with diameters ∼50 μm, CIRP J. Manuf. Sci. Technol. 27 (2019) 1-10.

P. A. Arrabiyeh, M. Dethloff, C. Müller, B. Kirsch, J. C. Aurich: Optimization of Micro Pencil Grinding Tools via Electrical Discharge Machining (EDM), J. Manuf. Sci. Eng. 141 (2019) 031005.

D. Setti, B. Kirsch, P. A. Arrabiyeh, J. C. Aurich: Visualization of Geometrical Deviations in Micro Grinding by Kinematic Simulations, Proceedings of the 13th International Conference on Manufacturing Science and Engineering (MSEC) Texas, USA (2018) V004T003A038. DOI: 10.1115/MSEC2018-6576.

P. A. Arrabiyeh, B. Kirsch, J. C. Aurich: Electroless plating and application of micro pencil grinding tools with a diameter of ~5 μm, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen) Venice, Italy (2018) 309-310. ISBN/ISSN: 978-0-9957751-2-1.

M. Bohley, I. G. Reichenbach, S. Kieren-Ehses, L. Heberger, P. A. Arrabiyeh, R. Merz, L. Böhme, J. Hering, B. Kirsch, M. Kopnarski, E. Kerscher, G. von Freymann, J. C. Aurich: Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings, J. Manuf. Mater. Process. 2 (2018) 22.

S. Kieren-Ehses, M. Bohley, P. A. Arrabiyeh, B. Kirsch, J. C. Aurich: Influence of different metal working fluids when micro machining cp-titanium with 50 µm diameter micro end mills, Procedia CIRP 71 (2018) 198-202.

P. A. Arrabiyeh, M. Bohley, F. Ströer, B. Kirsch, J. Seewig, J. C. Aurich: Experimental Analysis for the Use of Sodium Dodecyl Sulfate as a Soluble Metal Cutting Fluid for Micromachining with Electroless-Plated Micropencil Grinding Tools, Inventions 2 (2017) 29.

B. Kirsch, M. Bohley, P. A. Arrabiyeh, J. C. Aurich: Application of Ultra-Small Micro Grinding and Micro Milling Tools: Possibilities and Limitations, Micromachines 8 (2017) 261.

J. C. Aurich, C. Müller, M. Bohley, P. A. Arrabiyeh, B. Kirsch: Recent Developments in Desktop-Sized Machine Tools, Solid State Phenom. 261 (2017) 425-431.

P. A. Arrabiyeh, B. Kirsch, J. C. Aurich: Development of Micro Pencil Grinding Tools Via an Electroless Plating Process, J. Micro Nano-Manuf. 5 (2016) 011002.

P. A. Arrabiyeh, B. Kirsch, J. C. Aurich: Development of Micro Pencil Grinding Tools Via an Electroless Plating Process, Proceedings of the 11th International Manufacturing Science and Engineering Conference (MSEC) Blacksburg, Virginia, USA (2016). DOI: 10.1115/MSEC2016-8636.

P. Arrabiyeh, V. Raval, B. Kirsch, M. Bohley, J. C. Aurich: Electroless Plating of Micro Pencil Grinding Tools with 5-10 μm Sized cBN Grits, Adv. Mater. Res. 1140 (2016) 133-140.

M. Smaga, T. Beck, P. Arrabiyeh, I. Reichenbach, B. Kirsch, J. C. Aurich: Characterization of micro machined surface from TRIP/TWIP steels, MATEC Web Conf. 33 (2015). DOI: 10.1051/matecconf/20153307004.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B10 (Smaga, Beck)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

M. Smaga, T. Beck, M. Kopnarski, R. Merz, K. M. de Payrebrune, S. Wolke: Influence of Surface Morphology on Fatigue and Tribological Behavior of TRIP/TWIP Steels, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 289-312, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_12

M. Kopnarski, T. Beck, S. Diederichs, E. Kerscher, J. Seewig, M. Smaga: Geometrical, Microstructural, and Chemical Characterization, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 9-39, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_2

P. Sridhar, M. R. G. Prasad, R. Bilz, M. W. Klein, N. Vajragupta, K. M. de Payrebrune, M. Smaga: A comparative study of an isotropic and anistropic model to describe the micro‐indentation of TWIP steel, Proc. Appl. Math. Mech. 20 (2020).

M. W. Klein, B. Blinn, M. Smaga, T. Beck: High cycle fatigue behavior of high-Mn TWIP steel with different surface morphologies, Int. J. Fatigue 134 (2020) 105499.

A. Brodyanski, M. W. Klein, R. Merz, M. Smaga, T. Beck, M. Kopnarski: Microstructural changes caused by friction loading in high manganese TWIP steel and case-hardened 16MnCr5, Mater. Charact. 163 (2020) 110231.

M. W. Klein, M. Smaga, T. Beck: Surface Morphology and Its Influence on Cyclic Deformation Behavior of High-Mn TWIP Steel, Metals 8 (2018) 832.

M. Smaga, A. Boemke, T. Daniel, M. W. Klein: Metastability and fatigue behavior of austenitic stainless steels, MATEC Web Conf. 165 (2018). DOI: 10.1051/matecconf/201816504010.

M. W. Klein, M. Smaga, T. Beck: Influence of the surface morphology on the cyclic deformation behavior of HSD® 600 steel, MATEC Web Conf. 165 (2018). DOI: 10.1051/matecconf/201816506010.

S. Schmidt, M. W. Klein, A. Boemke, M. Smaga, T. Beck, R. Müller: Investigation of austenitic TRIP steels by means of a phase field model, Proc. Appl. Math. Mech. 18 (2018) e201800369.

M. W. Klein, F. Krebs, M. Smaga, T. Beck: Preparation of Polished Sections and Determination of the Phase Composition of Highly Metastable TRIP Steel by Microscopic and Radiographic Methods, Pract. Metallogr. 56 (2018) 106-123.

M. W. Klein, R. Skorupski, M. Smaga, T. Beck: Phase Transformation and Deformation Behavior of Steels with Different Content of Metastable Austenite, Engng. Trans. 65 (2017) 69-75.

M. Smaga, T. Beck, P. Arrabiyeh, I. Reichenbach, B. Kirsch, J. C. Aurich: Characterization of micro machined surface from TRIP/TWIP steels, MATEC Web Conf. 33 (2015). DOI: 10.1051/matecconf/20153307004.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt B11 (v. Freymann)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

G. v. Freymann, J. Hering-Stratemeier, K. E. J. Kühl, T. Palmer, E. H. Waller: Creating Surface Morphologies by Additive Manufacturing, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 147-171, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_7

J. Seewig, G. v. Freymann, J. C. Aurich, M. Eifler, J. Hering-Stratemeier, K. Klauer-Dobrowolski: Manufacturing of Areal Material Measures, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 315-347, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_13

R. Ulber, S. Antonyuk, J. C. Aurich, T. Beck, M. Bozoglu, G. v. Freymann, S. Kieren-Ehses, C. Müller-Renno, K. Muffler, A. Schmeckebier, C. Schönecker, J. Seewig, M. Smaga, J. Stiefelmaier, D. Strieth, A. Zayed, C. Ziegler, S. Zimmermann: Manufacturing-Morphology-Property Relationships for Biofilms, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 411-442, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_17

F. Krull, D. Strohner, J. Hering-Stratemeier, G. von Freymann, S. Antonyuk: Measurements of micro particle rotation by applying marking points using additive manufacturing tools, Adv. Powder Technol. 34 (2023) 104218. DOI: 10.1016/j.apt.2023.104218

E. H. Waller, S. Duran, G. von Freymann: Direct laser writing of 3D metallic mid- and far-infrared wave components, Nanophotonics 12 (2023) 1549-1555.

S. Dix, J. Gutsche, E. Waller, G. von Freymann, A. Widera: Fiber-tip endoscope for optical and microwave control, Rev. Sci. Instrum. 93 (2022) 095104.

N. Lang, S. Enns, J. Hering, G. von Freymann: Towards efficient structure prediction and pre-compensation in multi-photon lithography, Opt. Express 30 (2022).

K. Gross, M. Eifler, J. Hering, G. von Freymann, J. Seewig: Metrological characteristics of material measures depending on manufacturing parameters in direct laser writing and external stress factors, Proc. SPIE 11782, Optical Measurement Systems for Industrial Inspection XII 117820N (2021). DOI: 10.1117/12.2591655.

T. Palmer, E. H. Waller, H. Andrä, K. Steiner, G. von Freymann: Simulation Model for Direct Laser Writing of Metallic Microstructures Composed of Silver Nanoparticles, ACS Applied Nano Materials 4 (2021) 8872-8879.

M. Eifler, J. Hering, A. Keksel, G. von Freymann, J. Seewig: Towards a continuous frequency band chirp material measure for surface topography measuring instrument calibration, Proc. SPIE 11782, Optical Measurement Systems for Industrial Inspection XII 117820M (2021). DOI: 10.1117/12.2591935.

E. Hagen Waller, J. Karst, G. von Freymann: Photosensitive Material Enabling Direct Fabrication of Filigree 3D Silver Microstructures via Laser-Induced Photoreduction, Light: Advanced Manufacturing 2 (2021) 1-6.

G. Dai, X. Hu, J. Hering, M. Eifler, J. Seewig, G. von Freymann: Define and measure the dimensional accuracy of two-photon laser lithography based on its instrument transfer function, Journal of Physics: Photonics 3 (2021) 034002.

M. Eifler, J. Hering, J. Seewig, R. K. Leach, G. von Freymann, X. Hu, G. Dai: Comparison of material measures for areal surface topography measuring instrument calibration, Surf. Topogr. Metrol. Prop. 8 (2020) 025019.

M. Eifler, F. Ströer, J. Hering, G. von Freymann, J. Seewig: User-oriented evaluation of the metrological characteristics of areal surface topography measuring instruments, Proc. SPIE Int. Soc. Opt. Eng., Munich 11056 (2019). DOI: 10.1117/12.2526005.

E. H. Waller, S. Dix, J. Gutsche, A. Widera, G. von Freymann: Functional Metallic Microcomponents via Liquid-Phase Multiphoton Direct Laser Writing: A Review, micromachines 10 (2019) 827.

M. Eifler, J. Hering, G. von Freymann, J. Seewig: Calibration sample for arbitrary metrological characteristics of optical topography measuring instruments, Opt. Express 26 (2018) 16609-16623.

M. Eifler, J. Hering, G. von Freymann, J. Seewig: Manufacturing of the ISO 25178-70 material measures with direct laser writing: a feasibility study, Surf. Topogr. Metrol. Prop. 6 (2018) 024010.

M. Bohley, I. G. Reichenbach, S. Kieren-Ehses, L. Heberger, P. A. Arrabiyeh, R. Merz, L. Böhme, J. Hering, B. Kirsch, M. Kopnarski, E. Kerscher, G. von Freymann, J. C. Aurich: Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings, J. Manuf. Mater. Process. 2 (2018) 22.

J. Hering, M. Eifler, L. Hofherr, C. Ziegler, J. Seewig, G. von Freymann: Two-photon laser lithography in optical metrology, Proc. SPIE Int. Soc. Opt. Eng., San Francisco, USA 10544 (2018) 1054412. DOI: 10.1117/12.2289900.

E. H. Waller, G. von Freymann: From photoinduced electron transfer to 3D metal microstructures via direct laser writing, Nanophotonics 7 (2018) 1259-1277.

F. Ströer, J. Hering, M. Eifler, I. Raid, G. von Freymann, J. Seewig: Ultrafast 3D high precision print of micro structures for optical instrument calibration procedures, Addit. Manufacturing 18 (2017) 22-30.

J. Hering, E. H. Waller, G. Von Freymann: Automated aberration correction of arbitrary laser modes in high numerical aperture systems, Opt. Express 24 (2016) 28500-28508.

H. E. Waller, G. von Freymann: Spatio-Temporal Proximity Characteristics in 3D μ-Printing via Multi-Photon Absorption, Polymers 8 (2016) 297.

M. Eifler, J. Seewig, J. Hering, G. von Freymann: Calibration of z-axis linearity for arbitrary optical topography measuring instruments, Proc. SPIE Int. Soc. Opt. Eng. 9525 (2015) 952510.

b) Andere Veröffentlichungen

M. Eifler, J. Hering-Stratemeier, G. von Freymann, J. Seewig, P. Lehmann, W. Osten, A. Albertazzi Gonçalves: Compatibility analysis of profile and areal material measures, Proc. SPIE 12618, Optical Measurement Systems for Industrial Inspection XIII, Munich, Germany, (2023) 1261812 doi: 10.1117/12.2672243.

G. Bulun, M. Eifler, J. Hering, G. von Freymann, J. Seewig: Performance specification of areal surface texture instruments exemplified by a self-built WLI, Proc. SPIE Optical Engineering + Applications 11490 (2020) 114900H. DOI: 10.1117/12.2567666.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt C01 (Sauer)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

S. Thielen, S. Antonyuk, J. C. Aurich, T. Beck, H. Hasse, M. Kopnarski, B. Magyar, B. Sauer, M. Smaga: Manufacturing-Morphology-Property Relationships for Rotating Shaft Sealing Systems, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 349-367, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_14

B. Fazekas, C. Burkhart, S. Staub, S. Thielen, H. Andrä, T. J. Goda, B. Sauer, O. Koch: Radial shaft seals: How ageing in oil and hyper-viscoelasticity affect the radial force and the numerically predicted wear, Tribol. Int. 186 (2023).

F. Foko Foko, C. Burkhart, S. Thielen, B. Sauer: Analysis of the Sealing Capability of Radial Shaft Sealing Rings Using a Semi-Analytical Contact Model, Tribology Online 17 (2022) 97-109.

L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, B. Sauer: Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints, Tribol. Int. 171 (2022).

S. Thielen, P. Breuninger, H. Hotz, C. Burkhart, T. Schollmayer, B. Sauer, S. Antonyuk, B. Kirsch, J. C. Aurich: Improving the tribological properties of radial shaft seal countersurfaces using experimental micro peening and classical shot peening processes, Tribol. Int. 155 (2021).

C. Burkhart, S. Thielen, B. Sauer: Online determination of reverse pumping values of radial shaft seals and their tribologically equivalent system, Tribol. Schmierungstech. 67 (2020) 20-32.

C. Burkhart, S. Emrich, M. Kopnarski, B. Sauer: Excessive shaft wear due to radial shaft seals in lubricated environment. Part II: Measures against excessive shaft wear, Wear 462-463 (2020) 203483.

C. Burkhart, S. Emrich, M. Kopnarski, B. Sauer: Excessive shaft wear due to radial shaft seals in lubricated environment. Part I: Analysis and mechanisms, Wear 460-461 (2020) 203419.

S. Thielen, B. Magyar, B. Sauer: Thermoelastohydrodynamic Lubrication Simulation of Radial Shaft Sealing Rings, Journal of Tribology 142 (2020).

S. Thielen, B. Sauer: Thermo-Elastohydrodynamische Simulation von Radialwellendichtringen, Tribol. Schmierungstech. 67 (2020) 5-14.

S. Thielen, F. Foko Foko, B. Magyar, B. Sauer: Sealing contact shaft structure design using EHL simulation, Proceedings of the 17th EDF/PPRIME Workshop "Green Sealing", Paris, France (2018).

S. Thielen, B. Magyar, B. Sauer, F. Schneider, P. Mayer, B. Kirsch, R. Müller, E. v. Harbou, J. C. Aurich: Functional investigation of zero lead radial shaft seal counter-surfaces turned with a special method, Tribol. Int. 118 (2018) 442-450.

T. Kiekbusch, B. Magyar, B. Sauer: Multi-Ebenen-Simulation zur Berechnung der lokalen Lebensdauer in hochbelasteten Wälzkontakten, 12. VDI Fachtagung Gleit- und Wälzlager, Schweinfurt 2308 (2017) 103-112. ISBN/ISSN: 978-3-18-092308-6.

C. Kaiser, D. Frölich, B. Sauer: Systematische Untersuchung von schmutzbeaufschlagten Wellenabdichtungen, Tribol. Schmierungstech. 63 (2016) 22-29.

S. Thielen, B. Magyar, A. Piros: Reconstruction of three-dimensional turned shaft surfaces with fractal functions, Tribol. Int. 95 (2016) 349-357.

B. Magyar, B. Sauer: Methods for the simulation of the pressure, stress, and temperature distribution in the contact of fractal generated rough surfaces, Proc. Inst. Mech. Eng., Part J 231 (2015) 489-502.

D. Frölich, B. Magyar, B. Sauer, P. Mayer, B. Kirsch, J. C. Aurich, R. Skorupski, M. Smaga, T. Beck, D. Eifler: Investigation of wear resistance of dry and cryogenic turned metastable austenitic steel shafts and dry turned and ground carburized steel shafts in the radial shaft seal ring system, Wear 328-329 (2015) 123-131.

D. Frölich, B. Magyar, B. Sauer: A comprehensive Model of Wear, Friction and Contact Temperature in Radial Shaft Seals, Wear 311 (2014) 71-80. ISSN: 0043-1648.

I. Raid, J. Seewig, D. Frölich, B. Sauer, P. Mayer, F. Schneider, J. C Aurich: Oberflächenmodellierung gedrehter Wellenlaufflächen, wt-online 5 (2014) 279-287.

b) Andere Veröffentlichungen

C. Burkhart, M. Heier, R. Merz, J. Lösch, C. Wagner, S. Thielen, B. Sauer, M. Kopnarski, H. Hasse: Einfluss des Schmierstoffs auf Verschleißverhalten und -Mechanismen im System Radialwellendichtring, 62. Tribologie-Fachtagung (GfT) (2021).

S. Thielen: Entwicklung eines TEHD-Tribosimulationsmodells für Radialwellendichtringe (Kurzbeitrag zum GfT Förderpreis), Tribologie und Schmierungstechnik 67 (2020) 49-51.

C. Burkhart, K. Peter, S. Thielen, B. Sauer: Online determination of reverse pumping values of radial shaft seals and their tribologically equivalent system, 22nd Internatiional Colloquium Tribology, Stuttgart/Ostfildern (2020). ISBN/ISSN: 978-3-943563-11-5.

S. Thielen, B. Magyar, B. Sauer: TEHD Simulation von Radialwellendichtringen, 60. Tribologie-Fachtagung (GfT), Göttingen (2019).

B. Magyar, S. Thielen, M. Löwenstein, A. Becker, B. Sauer: EHD Simulation eines Kettengelenkes, Tribol. Schmierungstech. 65 (2018) 40-47.

S. Thielen, B. Magyar, F. Foko Foko, B. Sauer: EHL simulation of radial shaft seals, 58. Tribologie-Fachtagung (GfT) (2017).

S. Thielen, B. Magyar, F. Foko Foko, B. Sauer: EHL Simulation of the Radial Shaft Sealing System, World Tribol. Congr., 6th, Beijing, China (2017).

B. Magyar, S. Thielen, M. Löwenstein, A. Becker, B. Sauer: EHL Simulation of the Timing Chain Drive, World Tribol. Congr., 6th, Beijing, China (2017).

B. Magyar, S. Thielen, M. Löwenstein, A. Becker, B. Sauer: EHD Simulation eines Kettengelenkes, 57. Tribologie-Fachtagung (GfT) 1 (2016) 1-10.

C. Kaiser, D. Frölich, B. Sauer: Systematische Untersuchung von schmutzbeaufschlagten Wellenabdichtungen, 56. Tribologie-Fachtagung (GfT) 2 (2015) 1-11.

B. Magyar, B. Sauer: Theoretical Analysis of the Local Load Distribution of Rough Surfaces, 16th Nordic Symposium on Tribology (NORDTRIB) (2014).

B. Magyar, B. Sauer:  Simulation der Hysteresereibung von Elastomeren. 55. Tribologie-Fachtagung (GfT), Göttingen (2014) 37/1-9

D. Frölich, B. Magyar, B. Sauer: Semi-Analytical Model for the Contact Temperature Calculation in Radial Shaft Seals. 2014 STLE-Annual Meeting, Lake Buena Vista, Florida (2014).

B. Magyar, B. Sauer: Theoretical Analysis of the Local Load Distribution of Rough Surfaces, 16th Nordic Symposium on Tribology - NORDTRIB, Aarhus, Dänemark (2014).

D. Frölich, B. Jennewein, C. Kaiser, B. Sauer: A Comprehensive Model for the Simultaneous Analysis of Temperature, Friction and Wear in Radial Shaft Seal Rings, World Tribology Congress (WTC), Turin (2013) ISBN: 978-8-89-081850-9.

B. Magyar, B. Sauer: Contact Modeling of Rough Surfaces, 5th World Tribology Congress, Turin, Italien (2013). ISBN: 978-8-89-081850-9.

B. Magyar, D. Frölich, B. Sauer: Temperaturberechnung im RWDR-Dichtkontakt, 54. Tribologie-Fachtagung, Göttingen (2013) 84/1-11. ISBN: 978-3-00-043026-8.

B. Jennewein, D. Frölich, B. Sauer: Simulation of the Radial Force of Radial Shaft Seal Rings at different Temperatures and Aging Conditions. ISC Internationale Dichtungstagung, Stuttgart (2012).

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt C02 (Sauer)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

M. Oehler, D. Meffert, B. Sauer: Manufacturing-Morphology-Property
Relationships for Chain Joints, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 393-410, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_16

L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, B. Sauer: Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints, Tribol. Int. 171 (2022).

D. Meffert, M. Oehler, B. Sauer: Precise Friction Measurement in Drive Chains Using a Chain Joint Tribometer, Tribology Online 16 (2021) 151-158.

B. Sauer, F. Krupp, A. Becker: Power loss reduction in timing chain drives by adjusted tensioning and surface structuring, Industrial Lubrication and Tribology 71 (2019) 997-1002.

A. Becker, D. Meffert, B. Sauer: Friction and wear investigations on single chain joints, Forschung im Ingenieurwesen 83 (2019) 1-11.

T. Kiekbusch, B. Magyar, B. Sauer: Multi-Ebenen-Simulation zur Berechnung der lokalen Lebensdauer in hochbelasteten Wälzkontakten, 12. VDI Fachtagung Gleit- und Wälzlager, Schweinfurt 2308 (2017) 103-112. ISBN/ISSN: 978-3-18-092308-6.

B. Magyar, B. Sauer: Methods for the simulation of the pressure, stress, and temperature distribution in the contact of fractal generated rough surfaces, Proc. Inst. Mech. Eng., Part J 231 (2015) 489-502.

S. Buhl, K. Schmidt, D. Sappok, R. Merz, C. Godard, E. Kerscher, M. Kopnarski, B. Sauer, S. Antonyuk, S. Ripperger: Surface structuring of case hardened chain pins by cold-sprayed microparticles to modify friction and wear properties, Particuology 21 (2015) 32-40.

D. Sappok, B. Sauer: Wear Measurement on Chain Joint Components Using a Roundness Instrument, Period. Polytech., Mech. Eng. 59 (2015) 51-59.

A. Gummer, D. Sappok, B. Sauer: Verschleißverhalten von Hülsen- und Rollenketten, Ant. J. 4 (2013) 10-16, ISSN 0722-8546.

M. Marquart, M. Wahl, S. Emrich, G. Zhang, B. Sauer, M. Kopnarski, B. Wetzel: Enhancing the lifetime of MoS2-lubricated ball bearings, Wear 303 (2013) 169-177.

D. Sappok, A. Gummer, B. Sauer: Experimental Investigation of Bush Chain Wear, Proceedings of the 8th International Conference on Mech. Engineering (GÉPÉSZET), Budapest, Hungary (2012) 472-481. ISBN: 978-963-313-055-1.

b) Andere Veröffentlichungen

A. Becker, B. Sauer: Verschleiß- und Reibungsuntersuchungen am Bolzen-Hülsen-Kontakt von Steuerketten mit einem Einzelgelenkprüfstand, 59. Tribologie-Fachtagung (GfT), Göttingen (2018) 18/11-10.

A. Becker, B. Sauer: Wear investigations on timing chains using a chain joint tribometer, STLE Annual Meeting, Minneapolis, USA (2018).

B. Magyar, S. Thielen, M. Löwenstein, A. Becker, B. Sauer: EHD Simulation eines Kettengelenkes, Tribol. Schmierungstech. 65 (2018) 40-47.

A. Becker, F. Krupp, B. Sauer: Systematische Verschleißuntersuchungen an Kettenkomponenten, 58. Tribologie-Fachtagung (GfT), Göttingen 1 (2017) 11/1-10. ISBN/ISSN: 978-3-9817451-2-2.

A. Becker, B. Sauer: Experimental and analytical investigation of wear mechanisms in joint of time chains, World Tribol. Congr., 6th, Beijing, China (2017).

B. Magyar, S. Thielen, M. Löwenstein, A. Becker, B. Sauer: EHL Simulation of the Timing Chain Drive, World Tribol. Congr., 6th, Beijing, China (2017).

A. Becker, F. Krupp, B. Sauer, A. Rosenkranz: Experimentelle und simulative Untersuchungen des Wirkungsgrades und des Verschleißes von Steuerkettentrieben, Antriebstechnisches Kolloquium (ATK), Aachen (2017). ISBN/ISSN: 978-3-7431-4897-0.

B. Magyar, S. Thielen, M. Löwenstein, A. Becker, B. Sauer: EHD Simulation eines Kettengelenkes, 57. Tribologie-Fachtagung (GfT) 1 (2016) 1-10.

D. Sappok, R. Merz, B. Sauer, M. Kopnarski: Surface Analysis of Chain Joint Components after Tribological Load and Usage of Anti-Wear Additives Conf. Pap. Sci., Karlsruhe (2015) 12. DOI: 10.1155/2015/407048.

F. Krupp, D. Sappok, B. Sauer: Experimentelle und simulative Untersuchungen des Wirkungsgrades und des Verschleißes von Steuerkettentrieben, 3. Győrer Tribologie Tagung, Győr, Hungary, 2014, pp. 93-108. ISBN: 978-615-5298-35-6.

B. Magyar, B. Sauer: Theoretical Analysis of the Local Load Distribution of Rough Surfaces, 16th Nordic Symposium on Tribology - NORDTRIB, Aarhus, Dänemark (2014).

D. Sappok, A. Gummer, B. Sauer: Experimental and Analytical Wear Investigations of Bush- and Roller Chain Drives, 5th World Tribology Congress, Torino, Italien (2013). ISBN: 978-88-90818509.

D. Sappok, B. Sauer: Methoden zur Erfassung der Verschleiß-Messgrößen an Kettenkomponenten, 54. Tribologie-Fachtagung, Göttingen (2013) 70/1-11. ISBN: 978-3-00-043026-8.

B. Sauer, C. Fabian, A. Gummer, D. Sappok: Reibungs- und Verschleißuntersuchungen an Kettentrieben. VDI-Fachkonferenz Umschlingungsgetriebe, Nürtingen (2013).

A. Gummer, D. Sappok, B. Sauer: Experimentelle und analytische Verschleißuntersuchung von Hülsen- und Rollenketten, 53. Tribologie-Fachtagung, Göttingen (2012) 66/1-11. ISBN: 978-300-039-201-6.

A. Gummer, D. Sappok, B. Sauer: Kettenprüfeinrichtung zur Verschleißuntersuchung von Antriebs- und Steuerketten, Tribologie und Schmierungstechnik 59/2 (2012) 24-29. ISSN: 0724-3472.

c) Erteilte und angemeldete Patente (Entfällt)

Teilprojekt C03 (Ulber)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

R. Ulber, S. Antonyuk, J. C. Aurich, T. Beck, M. Bozoglu, G. v. Freymann, S. Kieren-Ehses, C. Müller-Renno, K. Muffler, A. Schmeckebier, C. Schönecker, J. Seewig, M. Smaga, J. Stiefelmaier, D. Strieth, A. Zayed, C. Ziegler, S. Zimmermann: Manufacturing-Morphology-Property Relationships for Biofilms, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 411-442, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_17

L. A. Philipp, K. Buhler, R. Ulber, J. Gescher: Beneficial applications of biofilms, Nat. Rev. Microbiol. (2023). doi.org/10.1038/s41579-023-00985-0

A. Zayed, M. A. Farag, A. Mehring, M. A. Salem, R. M. Ibrahim, S. Alseekh, A. R. Fernie, R. Ulber: Methyl jasmonate elicitation effect on the metabolic profile of cambial meristematic cells culture derived from sweet basil (Ocimum basilicum L.) in relation to antioxidant activity: Untargeted metabolomics study in a time-based approach, Phytochemistry 213 (2023) 113777.

A. Schmeckebier, A. Zayed, R. Ulber: Productive biofilms: from prokaryotic to eukaryotic systems, Journal of Chemical Technology & Biotechnology 97 (2022) 3049-3064.

A. Mehring, A. Zayed, M. A. Salem, S. Alseekh, A. R. Fernie, R. Ulber: Time-dependent behaviour of methyl jasmonate elicited cell suspension cultures of Ocimum species via untargeted mass spectrometry-based metabolomics, Industrial Crops and Products 187 (2022) 115414.

J. Chodorski, J. Hauth, D. Strieth, A. Wirsen, R. Ulber: Diffusion profiles in L. lactis biofilms under different conditions, Eng. Life Sci. 21 (2021) 29-36.

A. Mehring, N. Erdmann, J. Walther, J. Stiefelmaier, D. Strieth, R. Ulber: A simple and low-cost resazurin assay for vitality assessment across species, J Biotechnol 333 (2021) 63-66.

A. Mehring, J. Haffelder, J. Chodorski, J. Stiefelmaier, D. Strieth, R. Ulber: Establishment and triterpenoid production of Ocimum basilicum cambial meristematic cells, Plant Cell, Tissue and Organ Culture (PCTOC) 143 (2020) 573-581.

J. Stiefelmaier, D. Strieth, S. Di Nonno, N. Erdmann, K. Muffler, R. Ulber: Characterization of terrestrial phototrophic biofilms of cyanobacterial species, Algal Research 50 (2020) 101996.

M. Engel, A. Gemünde, D. Holtmann, C. Müller-Renno, C. Ziegler, N. Tippkötter, R. Ulber: Clostridium Acetobutylicum’s Connecting World: Cell Appendage Formation in Bioelectrochemical Systems, ChemElectroChem 7 (2020) 414-420.

D. Kleine, J. Chodorski, S. Mitra, C. Schlegel, K. Huttenlochner, C. Müller-Renno, J. Mukherjee, C. Ziegler, R. Ulber: Monitoring of biofilms grown on differentially structured metallic surfaces using confocal laser scanning microscopy, Eng. Life Sci. 19 (2019) 513-521.

J. F. Chignell, C. Schlegel, R. Ulber, K. F. Reardon: Quantitative proteomic analysis of Lactobacillus delbrueckii ssp. lactis biofilms, AlChE J. 64 (2018) 4341-4350.

K. Huttenlochner, N. Davoudi, C. Schlegel, M. Bohley, C. Müller-Renno, J. C. Aurich, R. Ulber, C. Ziegler: Paracoccus seriniphilus adhered on surfaces: Resistance of a seawater bacterium against shear forces under the influence of roughness, surface energy, and zeta potential of the surfaces, Biointerphases 13 (2018) 051003.

L. Hofherr, J. Chodorski, C. Müller-Renno, R. Ulber, C. Ziegler: Comparison of Versatile Immobilization Methods for Gram-Positive Bacteria on a Silicon Cantilever, Phys. Status Solidi A 215 (2018) 1700846.

D. Strieth, R. Ulber, K. Muffler: Application of phototrophic biofilms: from fundamentals to processes, Bioprocess Biosystems Eng. 41 (2018) 295-312.

N. Davoudi, K. Huttenlochner, J. Chodorski, C. Schlegel, M. Bohley, C. Müller-Renno, J. C. Aurich, R. Ulber, C. Ziegler: Adhesion forces of the sea-water bacterium Paracoccus seriniphilus on titanium: Influence of microstructures and environmental conditions, Biointerphases 12 (2017) 05G606.

D. Strieth, J. Schwing, S. Kuhne, M. Lakatos, K. Muffler, R. Ulber: A semi-continuous process based on an ePBR for the production of EPS using Trichocoleus sociatus, J. Biotechnol. 256 (2017) 6-12.

C. Schlegel, J. Chodorski, M. Huster, N. Davoudi, K. Huttenlochner, M. Bohley, I. Reichenbach, S. Buhl, P. Breuninger, C. Müller-Renno, C. Ziegler, J. Aurich, S. Antonyuk, R. Ulber: Analyzing the influence of microstructured surfaces on the lactic acid production of Lactobacillus delbrueckii lactis in a flow-through cell system, Eng. Life Sci. 17 (2017) 865-873.

K. Huttenlochner, C. Müller-Renno, C. Ziegler, R. Merz, B. Merz, M. Kopnarski, J. Chodorski, C. Schlegel, R. Ulber: Removing biofilms from stainless steel without changing surface properties relevant for bacterial attachment, Biointerphases 12 (2017) 02C404.

C. Rösch, F. Kratz, T. Hering, S. Trautmann, N. Umanskaya, N. Tippkötter, C. Müller-Renno, R. Ulber, M. Hannig, C. Ziegler: Albumin-lysozyme interactions: Cooperative adsorption on titanium and enzymatic activity, Colloids Surf. B. Biointerfaces 149 (2017) 115-121.

M. Stöckl, C. Schlegel, A. Sydow, D. Holtmann, R. Ulber, K.-M. Mangold: Membrane Separated Flow Cell for Parallelized Electrochemical Impedance Spectroscopy and Confocal Laser Scanning Microscopy to Characterize Electro-Active Microorganisms, Electrochim. Acta 220 (2016) 444-452.

M. Huster, C. Müller-Renno, C. Ziegler, C. Schlegel, R. Ulber, K. Muffler: Chloroperoxidase production by Caldariomyces fumago biofilms, Eng. Life Sci. 16 (2016) 88-92.

M. Fingerle, O. Köhler, C. Rösch, F. Kratz, C. Scheibe, N. Davoudi, C. Müller-Renno, C. Ziegler, M. Huster, C. Schlegel, R. Ulber, M. Bohley, J. C. Aurich: Cleaning of titanium substrates after application in a bioreactor, Biointerphases 10 (2015) 019007.

N. Davoudi, C. Müller-Renno, C. Ziegler, I. Raid, J. Seewig, C. Schlegel, K. Muffler, R. Ulber: Nanomechanical properties of the sea-water bacterium Paracoccus seriniphilus—A scanning force microscopy approach, Biointerphases 10 (2015) 019004.

B. Ludwig, D. Geib, C. Haas, J. Steingroewerb, T. Bley, K. Muffler, R. Ulber: Whole-cell biotransformation of oleanolic acid by free and immobilized cells of Nocardia iowensis: Characterization of new metabolites, Eng. Life Sciences 15 (2015) 108-115.

H. Al-Kaidy, A. Duwe, M. Huster, K. Muffler, C. Schlegel, T. Sieker, R. Stadtmüller, N. Tippkötter, R. Ulber: Biotechnology and Bioprocess Engineering - Form the first Ullmanns article to recent trends, Chem. Ing. Tech. 86 (2014) 2215-2225.

S. Kuhne, D. Strieth, M. Lakatos, K. Muffler, R. Ulber: A new photobioreactor concept enabling the production of desiccation induced biotechnological products using terrestrial cyanobacteria, J. Biotechnol. 192 (2014) 28-33.

K. Muffler, R. Ulber (Eds.): Productive Biofilms; Adv. Biochem. Eng. Biotechnol., Springer Verlag Berlin Heidelberg (2014). DOI: 10.1007/978-3-319-09695-7.

C. Müller-Renno, S. Buhl, N. Davoudi, J. C. Aurich, S. Ripperger, R. Ulber, K. Muffler, Ch. Ziegler: Novel Materials for biofilm reactors and their characterization, Adv. Biochem. Eng. Biotechnol. 146 (2014) 207-233.

K. Muffler, M. Lakatos, C. Schlegel, D. Strieth, S. Kuhne, R. Ulber: Application of biofilm bioreactors in white biotechnology, Adv. Biochem. Eng. Biotechnol. 146 (2014) 123-161.

b) Andere Veröffentlichungen

H. Hasse, S. Antonyuk, R. Ulber: Bauteiloberflächen – Morphologie auf der Mikroskala, Chem. Ing. Tech. 88 (2016) 1298-1298.

K. Muffler, C. Schlegel, C. Ziegler, J. C. Aurich, R. Ulber: Produktive Biofilme - Wechselwirkung zwischen Oberflächenmorphologie & Stoffwechsel, Biospektrum 2 (2013) 216-217.

C. Schlegel, N. Wesuls, A. Pasteur, C. Müller, I. Reichenbach, C. Ziegler, J. Aurich, K. Muffler, R. Ulber: Charakterisierung produktiver Biofilme auf mikrostrukturierten Bauteiloberflächen, Proceedings zum 16. Heiligenstädter Kolloquium, Heiligenstadt (2012) 63-67. ISBN: 978-3-00-039458-4.

c) Erteilte und angemeldete Patente

H. Al-Kaidy, N. Tippkötter, R. Ulber: Vorrichtung und Verfahren zur Bestimmung des Kontaktwinkels eines flüssigen oder mit Flüssigkeit gefüllten Körpers; DE 102014000419.8.

Teilprojekt C05 (Kirsch, Aurich)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

K. Gutzeit, M. Berndt, B. Kirsch, J.C. Aurich: Improving the Machinability when Milling Ti-6Al-4V Using a Sub-Zero Metalworking Fluid. Proceedings of the 23nd Machining Innovations Conference for Aerospace Industry (2023) S. 1-8

B. Kirsch, J. C. Aurich, K. Gutzeit, E. v. Harbou, H. Hasse, R. Müller: Creating Surface Morphologies by Cryogenic Machining, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 97-123, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_5

K. Gutzeit, G. Bulun, G. Stelzer, B. Kirsch, J. Seewig, J. C. Aurich: Sub-zero milling of Ti-6Al-4V—impact of the cutting parameters on the resulting forces, tool wear, and surface quality, Int. J. Adv. Manuf. Technol. 126 (2023) 3367-3381.

K. Gutzeit, M. Berndt, J. Schulz, D. Müller, B. Kirsch, E. von Harbou, J. C. Aurich: Optimization of the cooling strategy during cryogenic milling of Ti-6Al-4 V when applying a sub-zero metalworking fluid, Production Engineering 17 (2022) 501-510.

D. Weber, K. Gutzeit, B. Kirsch, C. R. D'Elia, B. S. Linke, M. R. Hill, C. J. Aurich: Analysis of the effect of cryogenic machining on the quality of milled thinwalled monolithic aluminum structural parts, MIC Procedia (2022) 029-036.

K. Gutzeit, G. Bulun, G. Stelzer, B. Kirsch, J. Seewig, C. J. Aurich: Investigation of the surface integrity when cryogenic milling of Ti-6Al-4V using a sub-zero metalworking fluid, Procedia CIRP 108 (2022) 25-30.

K. Gutzeit, S. Greco, B. Kirsch, C. J. Aurich: Kryogenes Fräsen additiv gefertigter Bauteile, VDI-Z Sonderteil Fertigungstechnik 164 (2022) 35-39.

K. Gutzeit, S. Greco, B. Kirsch, C. J. Aurich: Kryogenes Fräsen additiv gefertigter Bauteile, wt Werkstattstechnik online 111 (2021) 824-828.

K. Gutzeit, S. Basten, B. Kirsch, J. C. Aurich: Cryogenic Milling of Metastable Austenitic Stainless Steel Aisi 347, MM Science Journal (2021) 4962-4969.

K. Gutzeit, D. Weber, S. Basten, B. Kirsch, C. J. Aurich: Improving the surface morphology by adjusting the cutting parameters during cryogenic milling of Ti-6Al-4V, Proceedings of the Machining Innovations Conference (MIC) (2021) 24-31.

K. Gutzeit, S. Basten, B. Kirsch, C. J. Aurich: Verschleißuntersuchungen bei der kryogenen Zerspanung von TI-6Al-4V, Zeitschrift für wirtschaftlichen Fabrikbetrieb 116 (2021) 599-602.

S. Basten, B. Kirsch, K. Gutzeit, H. Hasse, J. C. Aurich: Influence of the Supplying Technique of a Sub-Zero Metalworking Fluid on the Performance of Face Turning of Ti-6Al-4V Titanium Alloy, Proceedings of the Machining Innovations Conference (MIC) (2020) 123-131.

K. Gutzeit, H. Hotz, B. Kirsch, J. C. Aurich: Influence of Nozzle Position during Cryogenic Milling of Ti-6Al-4V, WGP 2020: Production at the leading edge of technology, Berlin, Heidelberg (2020) 284-293. ISBN/ISSN: 978-3-662-62138-7.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Transferprojekt T01 (Aurich)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

J. C. Aurich, N. Altherr, S. Kieren-Ehses, B. Kirsch, T. Mayer: Creating Surface Morphologies by Micro Milling and Micro Grinding, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 67-95, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_4

I. G. Reichenbach, M. Bohley, F. J. P. Sousa, J. C. Aurich: Micromachining of PMMA—manufacturing of burr-free structures with single-edge ultra-small micro end mills, Int. J. Adv. Manuf. Technol. 96 (2018) 3665-3677.

M. Bohley, I. G. Reichenbach, S. Kieren-Ehses, L. Heberger, P. A. Arrabiyeh, R. Merz, L. Böhme, J. Hering, B. Kirsch, M. Kopnarski, E. Kerscher, G. von Freymann, J. C. Aurich: Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings, J. Manuf. Mater. Process. 2 (2018) 22.

M. Bohley, L. Heberger, B. Kirsch, J. C. Aurich: Untersuchung des Verschleißverhaltens von TiB2-beschichteten Mikrofräswerkzeugen, ZWF 112 (2017) 598-601.

B. Kirsch, M. Bohley, P. A. Arrabiyeh, J. C. Aurich: Application of Ultra-Small Micro Grinding and Micro Milling Tools: Possibilities and Limitations, Micromachines 8 (2017) 261.

J. C. Aurich, C. Müller, M. Bohley, P. Arrabiyeh, B. Kirsch: Recent Developments in Desktop-Sized Machine Tools, Solid State Phenom. 261 (2017) 425-431.

C. Müller, M. Bohley, B. Kirsch, J. C. Aurich: A novel rotational air bearing axis for the manufacturing of ultra-small micro end mills, 17th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2017) 144-145. ISBN/ISSN: 978-0-9957751-0-7.

J. C. Aurich, M. Bohley, I. G. Reichenbach, B. Kirsch: Surface quality in micro milling: Influences of spindle and cutting parameters, CIRP Ann. 66 (2017) 101-104.

C. Müller, I. G. Reichenbach, M. Bohley, J. C. Aurich: In Situ Topology Measurement of Micro Structured Surfaces with a Confocal Chromatic Sensor on a Desktop Sized Machine Tool, Adv. Mater. Res. 1140 (2016) 392-399.

P. Arrabiyeh, V. Raval, B. Kirsch, M. Bohley, J. C. Aurich: Electroless Plating of Micro Pencil Grinding Tools with 5-10 μm Sized cBN Grits, Adv. Mater. Res. 1140 (2016) 133-140.

M. Bohley, I. G. Reichenbach, C. Müller, B. Kirsch, J. C. Aurich: Compact hydrodynamic spindle module for micromachining applications, 16th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) 30 (2016). ISBN/ISSN: 978-0-9566790-8-6.

M. Bohley, I. G. Reichenbach, C. Müller, J. C. Aurich: Development of a desktop machine tool for integrated ultra-small micro end mill production and application, Proceedings of the 11th International Conference on Micromanufacturing (ICOMM), Irvine, USA (2016) 29-31.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Transferprojekt T02 (Kirsch, Hasse)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

B. Kirsch, J. C. Aurich, K. Gutzeit, E. v. Harbou, H. Hasse, R. Müller: Creating Surface Morphologies by Cryogenic Machining, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 97-123, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_5

S. Basten, B. Kirsch, H. Hasse, J. C. Aurich: Sub-zero metalworking fluids for high performance cutting of difficult to cut materials, Procedia CIRP 101 (2021) 342-345.

S. Basten, B. Kirsch, K. Gutzeit, H. Hasse, J. C. Aurich: Influence of the Supplying Technique of a Sub-Zero Metalworking Fluid on the Performance of Face Turning of Ti-6Al-4V Titanium Alloy, Proceedings of the Machining Innovations Conference (MIC) 2020 (2020).

S. Basten, B. Kirsch, H. Hasse, J. C. Aurich: Formulation of sub-zero metalworking fluids for cutting processes: Influence of additives, CIRP J. Manuf. Sci. Technol. 31 (2020) 25-33.

S. Basten, B. Kirsch, H. Hasse, J. C. Aurich: Turning of AISI 4140 (42CrMo4V): A novel sub-zero cooling approach, 8. WGP-Jahreskongress, Aachen (2018). DOI: 10.1007/978-3-030-03451-1_31.

B. Kirsch, S. Basten, H. Hasse, J. C. Aurich: Sub-zero cooling: A novel strategy for high performance cutting, CIRP Ann. 67 (2018) 95-98.

S. Basten, P. Mayer, B. Kirsch, H. Hasse, J. C. Aurich: Kryogener Kühlschmierstoff auf der Basis von Ethylenglykol, ZWF 111 (2016) 444-448.

J. C. Aurich, F. Schneider, P. Mayer, B. Kirsch, H. Hasse: Oberflächenerzeugungs-Morphologie-Eigenschafts-Beziehungen: Vom Fertigungsverfahren direkt zu den Bauteileigenschaften, ZWF 111 (2016) 213-216.

b) Andere Veröffentlichungen

S. Basten, B. Kirsch, H. Hasse, J. C. Aurich: Neue kryogene Kühlstrategie für die Zerspanung, MM Maschinenmarkt 13 (2017) 24-28.

c) Erteilte und angemeldete Patente

J. C. Aurich, S. Basten, H. Hasse, E. v. Harbou, B. Kirsch, P. Mayer, E. Ströfer: Verfahren zum Betrieb einer spanenden Werkzeugmaschine und Werkzeugmaschine für die spanende Bearbeitung von Werkstücken, Deutsches Patentamt DE102016215545 (2017).

Transferprojekt T03 (Seewig, Aurich)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

J. Seewig, G. v. Freymann, J. C. Aurich, M. Eifler, J. Hering-Stratemeier, K. Klauer-Dobrowolski: Manufacturing of Areal Material Measures, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 315-347, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_13

K. Klauer-Dobrowolski, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich: Ball-end micro-milling of material measures: wear behavior in field use, Int. J. Adv. Manuf. Technol. 128 (2023) 611-623.

K. Klauer, N. Altherr, M. Eifler, B. Kirsch, V. Böß, J. Seewig, C. J. Aurich: Kinematic simulation to investigate the influence of the cutting edge topography when ball end micro milling, 18th CIRP Conference on Modeling of Machining Operation, Procedia CIRP 102 (2021) 109-114. DOI: 10.1016/j.procir.2021.09019.

S. Schmidt, M. Eifler, J. C. Issel, K. M. de Payrebrune, F. Ströer, A. Karatas, J. Seewig: Parameter Identification of an Abrasive Manufacturing Process With Machine Learning of Measured Surface Topography Information, J. Comput. Inf. Sci. Eng. 22 (2022) 041010-1-04101015.

M. Eifler, B. Brodmann, P. E. Hansen, J. Seewig: Traceable functional characterization of surface topography with angular-resolved scattering light measurement, Surf. Topogr. Metrol. Prop. 9 (2021).

K. Klauer, M. Eifler, B. Kirsch, V. Böß, J. Seewig, J. C. Aurich: Analysis of dimensional accuracy for micro-milled areal material measures with kinematic simulation, Int. J. Adv. Manuf. Technol. 116 (2021) 3087-3102.

M. Eifler, J. Hering, A. Keksel, G. von Freymann, J. Seewig: Towards a continuous frequency band chirp material measure for surface topography measuring instrument calibration, Proc. SPIE 11782, Optical Measurement Systems for Industrial Inspection XII 117820M (2021). DOI: 10.1117/12.2591935.

K. Klauer, S. Greco, B. Kirsch, C. J. Aurich: Effect of vibration-assistance on tool wear, process forces and surface roughness when micro milling AISI 316L, euspen's 21st International Conference & Exhibition, Copenhagen, DK (2021).

G. Dai, X. Hu, J. Hering, M. Eifler, J. Seewig, G. von Freymann: Define and measure the dimensional accuracy of two-photon laser lithography based on its instrument transfer function, Journal of Physics: Photonics 3 (2021) 034002.

S. Greco, K. Klauer, B. Kirsch, C. J. Aurich: Simulation and Application of a Piezo-Driven System Enabling Vibration-Assisted Micro Milling, 2nd International Conference of the DFG International Research Training Group 2057 - Physical Modeling for Virtual Manufacturing, Dagstuhl, Germany 89 (2021). DOI: 10.4230/OASIcs.iPMVM.2020.3.

M. Eifler, K. Klauer, B. Kirsch, J. C. Aurich, J. Seewig: Performance verification of areal surface texture measuring instruments with the Sk-parameters, Measurement 173 (2021) 108550.

K. Klauer, M. Eifler, J. Hartig, B. Kirsch, J. Seewig, J. C. Aurich: Lagerung UP-gedrehter Kalibriernormale - Einfluss der Lagerbedingungen auf die Eigenschaften der Kalibriernormale, wt Werkstattstechnik online 110 (2020) 772-778.

K. Klauer, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich: Micro milling of areal material measures –Study on surface generation for different up and down milling strategies, Procedia CIRP 87 (2020) 13-18.

K. Groß, M. Eifler, K. Klauer, K. Huttenlochner, B. Kirsch, C. Ziegler, J. C. Aurich, J. Seewig: Determination of the surface topography of ball end micro milled material measures, Engineering Science and Technology (2020).

K. Klauer, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich: Correlation between different cutting conditions, surface roughness and dimensional accuracy when ball end micro milling material measures with freeform surfaces, Machining Science and Technology 24 (2019) 446-464.

K. Klauer, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich: Ball end micro milling of areal material measures: influence of the tilt angle on the resulting surface topography, Production Engineering 14 (2019) 239-252.

K. Klauer, M. Eifler, B. Kirsch, J. Seewig, J. C. Aurich: Micro milling of areal material measures: Influence of the manufacturing parameters on the surface quality. Production at the leading edge of technology, Proceedings of the 9th Congress of the German Academic Association for Production Technology (2019) 259-268. ISBN/ISSN: 978-3662604168.

M. Eifler, K. Klauer, J. Seewig, B. Kirsch, J. C. Aurich: Model-based design of areal material measures with component surfaces, Surf. Topogr. Metrol. Prop. 7 (2019) 044003.

J. Seewig, M. Eifler, D. Hüser, R. Meeß: Rk material measure - a model-based design, Technisches Messen 86 (2019) 478-486.

M. Eifler, F. Ströer, J. Hering, G. von Freymann, J. Seewig: User-oriented evaluation of the metrological characteristics of areal surface topography measuring instruments, Proc. SPIE Int. Soc. Opt. Eng., Munich 11056 (2019). DOI: 10.1117/12.2526005.

K. Klauer, M. Eifler, G. Stelzer, B. Kirsch, J. Seewig, J. C. Aurich: Design and machining of a calibration artefact for an angular-resolved scattering light sensor, 19th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) (2019) 270-274. ISBN/ISSN: 978-0-9957751-4-5.

M. Eifler, K. Klauer, R. Volk, S. Feifel, B. Kirsch, J. Seewig, J. C. Aurich: Verschleiß von Raunormalen - Experimentelle Untersuchung zum Einfluss der taktilen Abtastung, wt Werkstatttechnik online 108 (2018) 749-754.

M. Eifler, J. Hering, G. von Freymann, J. Seewig: Calibration sample for arbitrary metrological characteristics of optical topography measuring instruments, Opt. Express 26 (2018) 16609-16623.

K. Klauer, M. Eifler, J. Seewig, B. Kirsch, J. C. Aurich: Application of function-oriented roughness parameters using confocal microscopy, Eng. Sci. Technol. 21 (2018) 302-313.

M. Eifler, J. Hering, G. von Freymann, J. Seewig: Manufacturing of the ISO 25178-70 material measures with direct laser writing: a feasibility study, Surf. Topogr. Metrol. Prop. 6 (2018) 024010.

J. Hering, M. Eifler, L. Hofherr, C. Ziegler, J. Seewig, G. von Freymann: Two-photon laser lithography in optical metrology, Proc. SPIE Int. Soc. Opt. Eng., San Francisco, USA 10544 (2018) 1054412. DOI: 10.1117/12.2289900.

M. Eifler, K. Klauer, B. Kirsch, J. Seewig, J. C. Aurich: Micro-milling of areal material measures – influences on the resulting surface topography, Procedia CIRP 71 (2018) 122-127.

M. Eifler, F. Ströer, S. Rief, J. Seewig: Model Selection and Quality Estimation of Time Series Models for Artificial Technical Surface Generation, Technologies 6 (2018) 3.

A. Keksel, M. Eifler, J. Seewig: Modeling of topography measuring instrument transfer functions by time series models, Meas. Sci. Technol. 29 (2018) 095012.

S. Rief, F. Ströer, S. Kieß, M. Eifler, J. Seewig: An Approach for the Simulation of Ground and Honed Technical Surfaces for Training Classifiers, Technologies 5 (2017) 66.

K. Klauer, M. Eifler, F. Schneider, J. Seewig, J. C. Aurich: Ageing of roughness artefacts–impact on the measurement results, 17th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) 17 (2017) 403-404.

b) Andere Veröffentlichungen

M. Eifler, J. Hering-Stratemeier, G. von Freymann, J. Seewig, P. Lehmann, W. Osten, A. Albertazzi Gonçalves: Compatibility analysis of profile and areal material measures, Proc. SPIE 12618, Optical Measurement Systems for Industrial Inspection XIII, Munich, Germany, (2023) 1261812 doi: 10.1117/12.2672243.

F. M. Torner, A. Karatas, M. Eifler, I. Raid, J. Seewig: Application of GPU-based, highly parallelized algorithms for the estimation of electromagnetic multi-layer interactions, Proc. SPIE Int. Soc. Opt. Eng. 10329 (2017) 1032922.

J. Seewig, M. Eifler: Calibration of areal surface topography measuring instruments, Proc. SPIE Int. Soc. Opt. Eng. 10449 (2017) 1044911.

c) Erteilte und angemeldete Patente (Entfällt)

Transferprojekt T05 (Sauer, Beck)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

B. Sauer, T. Beck, B. Blinn, F. Foko Foko, P. Ostermayer, L. Rüth: Influence of the Surface Morphology on Rolling Bearing Life Under Mixed Lubrication, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 369-392, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_15

F. Foko Foko, L. Rüth, O. Koch, B. Sauer: Multiskaliger Ansatz zur Lebensdauerabschätzung von Wälzlagern mit Hilfe des lokalen Ermüdungsmodells nach Fatemi-Socie, Forschung im Ingenieurwesen (2023). doi.org/10.1007/s10010-023-00663-w

F. Foko Foko, L. Rüth, O. Koch, B. Sauer: Study of the Plastic Behavior of Rough Bearing Surfaces Using a Half-Space Contact Model and the Fatigue Life Estimation According to the Fatemi–Socie Model, Lubricants 11 (2023).

F. Foko Foko, C. Burkhart, S. Thielen, B. Sauer: Analysis of the Sealing Capability of Radial Shaft Sealing Rings Using a Semi-Analytical Contact Model, Tribology Online 17 (2022) 97-109.

P. Ostermayer, W. Ankener, B. Blinn, M. Smaga, D. Eifler, T. Beck: Analysis of the Subsurface Volume of Differently Finished AISI 52100 by Cyclic Indentation and X‐Ray Diffraction, Steel Res. Int. (2021).

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Assoziiertes Projekt μKerWe (Aurich)

a) Arbeiten mit einer wissenschaftlichen Qualitätssicherung und Buchbeiträge

J. C. Aurich, N. Altherr, S. Kieren-Ehses, B. Kirsch, T. Mayer: Creating Surface Morphologies by Micro Milling and Micro Grinding, in: J. C. Aurich, H. Hasse (Eds.), Component Surfaces: Manufacturing-Morphology-Property Relationships, Springer Series in Advanced Manufacturing, Springer Nature (2023) 67-95, ISBN 978-3-031-35574-5. doi.org/10.1007/978-3-031-35575-2_4

S. Kieren-Ehses, T. Mayer, B. Kirsch, J. C. Aurich: Influence of the parameters of a minimum quantity lubrication system on micro milling process results, Int. J. Adv. Manuf. Technol. (2023).

T. Mayer, A. Lange, A. Schulz, B. Kirsch, J. C. Aurich: Development of an angular position detection method to accurately characterize high speed spindles without encoders, Proceedings of the 23rd Euspen International Conference, Copenhagen, DK (2023) 215-219.

S. Kieren-Ehses, T. Mayer, B. Kirsch, J. C. Aurich: Indirect workpiece cooling system for micro milling based on a Peltier element, Proceedings of the 23rd Euspen International Conference, Copenhagen, DK (2023) 473-476.

T. Mayer, S. Kieren-Ehses, B. Kirsch, J. C. Aurich: Herstellung und Anwendung vollkeramischer Mikroschaftfräser, ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 117 (2022) 7-8.

T. Mayer, S. Kieren-Ehses, B. Kirsch, J. C. Aurich: Micro milling of brass and commercially pure titanium with all-ceramic micro end mills made from four different ceramic tool substrates, Proceedings of the 22nd euspen International Conference, Geneva, CH (2022) 455-458.

T. Mayer, S. Kieren-Ehses, B. Kirsch, J. C. Aurich: Dressing of grinding wheels for the manufacture of all-ceramic micro end mills, Proceedings of the 22nd euspen International Conference, Geneva, CH (2022) 479-482.

J. C. Aurich, S. Kieren-Ehses, T. Mayer, M. Bohley, B. Kirsch: An investigation of the influence of the coating on the tool lifetime and surface quality for ultra-small micro end mills with different diameters, CIRP J. Manuf. Sci. Technol. 37 (2022) 92-102.

T. Mayer, S. Kieren-Ehses, B. Kirsch, C. J. Aurich: Atomic force microscope for in situ micro end mill characterization - Part II: Development of an algorithm to characterize the cutting edge radius of micro end mills, euspen's 21st International Conference & Exhibition, Copenhagen, DK (2021).

S. Kieren-Ehses, T. Mayer, B. Kirsch, C. J. Aurich: Atomic force microscope for in situ micro end mill characterization - Part I: Integration into a desktop sized machine tool, euspen's 21st International Conference & Exhibition, Copenhagen, DK (2021).

M. Heintz, T. Mayer, B. Kirsch, J. C. Aurich: Tool/workpiece contact detection via acoustic emission in micro grinding, 20th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) Geneva (2020) 587-588.

S. Kieren-Ehses, M. Bohley, T. Mayer, B. Kirsch, J. C. Aurich: Effect of high spindle speeds on micro end milling of commercially pure titanium, 20th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) Geneva (2020) 63-66.

T. Mayer, S. Kieren-Ehses, M. Heintz, B. Kirsch, J. C. Aurich: Manufacture of novel all‐ceramic micro end mills, 20th International Conference Proceedings of the European Society for Precision Engineering and Nanotechnology (euspen) Geneva (2020) 113-114.

b) Andere Veröffentlichungen (Entfällt)

c) Erteilte und angemeldete Patente (Entfällt)

Founded by

RSS

Last Change: December 6th 2023